# Service bulletin 44998

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

- Type: Service bulletin
- NHTSA id: 10058193
- Published by NHTSA: 2015\-08\-13
- Manufacturer's number: 44998
- Manufacturer's date: 2015\-03\-01
- NHTSA component: POWER TRAIN:AUTOMATIC TRANSMISSION

## NHTSA's summary

FORD 2012\-2015 F\-650 \- EQUIPPED WITH 6.8L GAS ENGINE: SERVICE INFORMATION ON CERTAIN VEHICLES EQUIPPED WITH A 6.8L V\-10 GAS ENGINE AND 6R140 TRANSMISSION MAY CAUSE A NOISE UPON INSTALLATION. \*LJ

## The document

No address for NHTSA's copy can be built for this communication. Ask the dealer for it by the manufacturer's number.

## Components

Transmission and driveline, Automatic transmission

## Vehicles listed

- 2012 to 2015 FORD F\-650 SD

## Other bulletins for the same vehicles and component

- [16\-0060](/bulletins/10183761.md), 2020-12-07, Service bulletin: POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE:SOFTWARE. Some 2012\-2016 F\-Super Duty vehicles equipped with a 6.2L or 6.8L engine built on or before 4/6/2016 may exhibit an illuminated malfunction indicator lamp \(MIL\) with DTCs P0627, P025A, P025B and/or U0109 stored in powertrain control module \(PCM\) memory.
- [SSM 47823](/bulletins/10156886.md), 2019-04-08, Service bulletin: POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE \(TCM/PCM/TECM\); ENGINE. Various 2013\-2019 vehicles may exhibit an illuminated malfunction indicator lamp \(MIL\) with diagnostic trouble code \(DTC\) P264F after powertrain control module \(PCM\) replacement. This DTC indicates that the engine serial number \(ESN\) must be programmed into the PCM. The ESN is located on PTS\> OASIS\> Features\> Engine Serial Number. Once the ESN is obtained from the historical vehicle bill of materials \(HvBOM\), it can be programmed into the PCM using the appropriate Ford diagnostic scan tool. Navigate to the toolbox tab\> powertrain menu\> Service Functions\> ESN.
- [SSM 47597](/bulletins/10148731.md), 2018-11-19, Service bulletin: ELECTRICAL SYSTEM; POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE \(TCM/PCM/TECM\); EQUIPMENT. Some 2013\-2019 F\-Super Duty vehicles equipped with a 6.7L engine may exhibit an illuminated MIL with only DTC P2074 stored in the powertrain control module \(PCM\). This may be due to a dirty air filter, replace the filter if necessary. Do not replace the PCM or mass air flow \(MAF\) sensor for this concern. Instead perform a MAF parameter reset under: Toolbox \> Powertrain \> Service Functions \> Reset/Clear Specified Function \> Reset/Clear Functions \> MAF Sensor. Engineering is investigating. Monitor OASIS for updates.
- [18U12](/bulletins/10137150.md), 2018-05-21, Service bulletin: POWER TRAIN:AUTOMATIC TRANSMISSION. Certain 2018 Model Year Escape and MKC Vehicles \- Transmission Bell Housing Bolt TorqueCertain 2012\-2016 Model Year F\-450 ? F\-750 and F\-59 Commercial Stripped Chassis Vehicles Equipped with a 6.8L Engine \- Camshaft Roller Follower Replacement
- [TSB18\-2109](/bulletins/10137120.md), 2018-05-21, Service bulletin: POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE \(TCM/PCM/TECM\); ELECTRICAL SYSTEM. 2015 F\-Super Duty vehicles equipped with a 6.7L diesel engine may exhibit an illuminated MIL with DTCs P012F, P207F, P2002, and/or P20EE setting in the powertrain control module \(PCM\). Reprogram the PCM using Integrated Diagnostic System \(IDS\) or Ford J2534 Diagnostic Software \(FJDS\) release 109.01 or higher. Make sure you are connected to the internet when entering module programming to obtain the latest updates. Calibration files may also be obtained at www.motorcraftservice.com.
- [SSM 46900](/bulletins/10127405.md), 2018-01-29, Service bulletin: POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE \(TCM/PCM/TECM\); ELECTRICAL SYSTEM. Some vehicles may exhibit a no start condition with an illuminated malfunction indicator lamp \(MIL\) and a DTC P161A after PCM replacement. This may be due to the parameter reset procedure not being properly completed. To clear this DTC, use the Ford Integrated Diagnostic System \(IDS\) service tool or Ford J2534 Diagnostic Software, select \- Toolbox \- Body \- Security \- PATS Functions \- Parameter Reset. Follow the on\-screen instructions to complete the procedure. This procedure will transfer the existing Key ID information between the modules without the need of having 2 programmed PATS keys present. There is no need to program keys when the PCM is going to be replaced. Additional information can be found in the Workshop Manual \(WSM\), Section 419\-01. Missing or lost keys are not warrantable.
- [SSM 46451](/bulletins/10099463.md), 2017-05-17, Service bulletin: POWER TRAIN:AUTOMATIC TRANSMISSION. 2009\-2017 VEHICLES EQUIPPED WITH A 6R80, 6R100, 6R140 AUTOMATIC TRANSMISSION HAVE AN UPDATED MAIN CONTROL VALVE BODY OVERHAUL PROCEDURE. REFER TO WORKSHOP MANUAL \(WSM\), SECTION 307\-01 FOR MAIN CONTROL VALVE BODY \(7A100\) OVERHAUL PROCEDURES. NOT ALL VALVE BODIES REQUIRE REPLACEMENT. INSPECT THE VALVE BODY BORES, SPRINGS AND VALVES AS DIRECTED DURING DIAGNOSIS AND REPAIR. REFER TO GENERAL SERVICE BULLETIN \(GSB\) G0000093 AUTOMATIC TRANSMISSION MAIN CONTROL INSPECTION FOR A VIDEO CLIP TO AID IN THE DIAGNOSIS OF THESE REPAIRS.
- [TSB 16\-0154](/bulletins/10095963.md), 2017-03-20, Service bulletin: POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE \(TCM/PCM/TECM\). SOME 2011\-2016 F\-SUPER DUTY VEHICLES EQUIPPED WITH A 6.7L DIESEL ENGINE, MAY EXHIBIT AN ILLUMINATED MIL WITH DTCS P208E AND/OR P218F STORED IN THE POWERTRAIN CONTROL MODULE \(PCM\) MEMORY DUE TO UREA CRYSTALS FORMING ON THE REDUCTANT INJECTOR NOZZLE. FOLLOW THE SERVICE PROCEDURE STEPS TO CORRECT THE CONDITION.
- [TSB 17\-0021](/bulletins/10095623.md), 2017-03-17, Service bulletin: POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE \(TCM/PCM/TECM\). SOME 2015\-2016 F\-SUPER DUTY PICKUP VEHICLES EQUIPPED WITH A 6.7L ENGINE MAY EXHIBIT AN ILLUMINATED MALFUNCTION INDICATOR LAMP \(MIL\) WITH DTCS P2002, P2201, P2459, P2463 AND/OR P246C. REPROGRAM THE POWERTRAIN CONTROL MODULE \(PCM\) TO THE LATEST CALIBRATION USING IDS RELEASE 104.02 OR HIGHER. MAKE SURE YOU ARE CONNECTED TO THE INTERNET WHEN ENTERING MODULE PROGRAMMING TO OBTAIN THE LATEST UPDATES. CALIBRATION FILES MAY ALSO BE OBTAINED AT WWW.MOTORCRAFTSERVICE.COM.
- [SSM 45946](/bulletins/10091434.md), 2017-02-13, Service bulletin: POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE \(TCM/PCM/TECM\). SOME 2015\-2016 F\-SUPER DUTY VEHICLES EQUIPPED WITH A 6.7L DIESEL ENGINE MAY EXHIBIT DTC P0170 \(FUEL TRIM \- BANK 1\) IN THE POWERTRAIN CONTROL MODULE \(PCM\). WHEN REPAIRING THIS DTC, REFER TO THE ONLINE VERSION OF THE POWERTRAIN CONTROL/EMISSION DIAGNOSTIC \(PC/ED\) MANUAL FOR LATEST DIAGNOSTICS. THE PINPOINT TEST AND DIAGNOSTIC TROUBLE CODE CHART HAVE BEEN UPDATED IN SECTION 4 AND 5 FOR DTC P0170.

JSON: [/v1/bulletins/10058193](/v1/bulletins/10058193)

[Report an error on this page](https://github.com/wenmar-pro/wenmar-open/issues/new?template=data_correction.yml&title=Data%20correction%3A%20Service%20bulletin%2044998&page=https%3A%2F%2Fopen.wenmarpro.com%2Fbulletins%2F10058193&vehicle=Service%20bulletin%2044998)