# Service bulletin 08\-004\-15 REV.A

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

- Type: Service bulletin
- NHTSA id: 10057936
- Published by NHTSA: 2015\-07\-15
- Manufacturer's number: 08\-004\-15 REV.A
- Manufacturer's date: 2015\-05\-06
- Replaces: SB08\-004\-15 REVB
- NHTSA component: ELECTRICAL SYSTEM:SOFTWARE

## NHTSA's summary

CHRYSLER 2013\-2015 FIAT 500E: THIS BULETIN SUPERSEDES 08\-004\-15 DATED JAN. 09, 2015 PLEASE REMOVE FROM YOUR FILES. BULLETIN INFORMATION REGARDING UPDATING MODULES SOFTWARE: VTM, BCM, OBCM, PIM, AND BPCM IF REQUIRED. \*LJ UPDATED 8/25/15. \*PE

## The document

No address for NHTSA's copy can be built for this communication. Ask the dealer for it by the manufacturer's number.

## Components

Electrical system, Software

## Vehicles listed

- 2013 to 2015 FIAT 500E

## Other bulletins for the same vehicles and component

- [1805316](/bulletins/10215164.md), 2022-07-05, Service bulletin: ELECTRICAL SYSTEM:SOFTWARE; POWER TRAIN. Diagnostic And System Improvements.
- [1802715 Rev C](/bulletins/10215138.md), 2022-07-05, Service bulletin: ELECTRICAL SYSTEM:SOFTWARE. Diagnostic And System Improvements.
- [0812215](/bulletins/10215097.md), 2022-07-05, Service bulletin: TIRES:PRESSURE MONITORING AND REGULATING SYSTEMS; EQUIPMENT ADAPTIVE/MOBILITY; ELECTRICAL SYSTEM:SOFTWARE. This bulletin involves performing a wiTECH Misc\-Function routine, for proper operation of
- [18\-032\-15 REVA](/bulletins/10150556.md), 2018-12-10, Service bulletin: ELECTRICAL SYSTEM:SOFTWARE; ENGINE. Flash: 1.4L Diagnostic And System Improvements This bulletin involves selectively erasing and reprogramming the Powertrain Control Module \(PCM\) with new software. A small number of customers may experience a crank no start condition in extreme cold temperatures of \-4°F \(\-20°C\) partially due to the available fuel blend conditions, They may also experience a Malfunction Indicator Lamp \(MIL\) illumination. Upon further investigation the Technician may find that Diagnostic Trouble Code P0141 \- O2 SENSOR 1/2 HEATER PERFORMANCE has been set in the PCM.
- [18\-032\-15](/bulletins/10150537.md), 2018-12-10, Service bulletin: ELECTRICAL SYSTEM:SOFTWARE; ENGINE. Flash: 1.4L Diagnostic And System Improvements This bulletin involves selectively erasing and reprogramming the Powertrain Control Module \(PCM\) with new software. A small number of customers may experience a crank no start condition in extreme cold temperatures of \-4°F \(\-20°C\) partially due to the available fuel blend conditions, They may also experience a Malfunction Indicator Lamp \(MIL\) illumination. Upon further investigation the Technician may find that Diagnostic Trouble Code P0141 \- O2 SENSOR 1/2 HEATER PERFORMANCE has been set in the PCM.
- [18\-032\-15 REV\-C](/bulletins/10148992.md), 2018-11-26, Service bulletin: ELECTRICAL SYSTEM:SOFTWARE; ELECTRICAL SYSTEM:STARTER ASSEMBLY:SOLENOID; POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE \(TCM/PCM/TECM\); ELECTRICAL SYSTEM. Flash: 1.4L Diagnostic And System Improvements This bulletin involves selectively erasing and reprogramming the Powertrain Control Module \(PCM\) with new software. A small number of customers may experience one of the following conditions or a a Malfunction Indicator Lamp \(MIL\) illumination. Upon further investigation the Technician may find a Diagnostic Trouble Code has been set in the PCM. ? P0141 \- O2 Sensor 1/2 Heater Performance. ? Crank no start condition in extreme cold temperatures of \-4°F \(\-20°C\) partially due to the available fuel blend conditions. Additional Software Improvements Include: ? P1046 \- Cylinder 1 Oil Supply Solenoid Valve Overcurrent. ? P1048 \- Cylinder 2 Oil Supply Solenoid Valve Overcurrent. ? P104A \- Cylinder 3 Oil Supply Solenoid Valve Overcurrent. ? P104C \- Cylinder 4 Oil Supply Solenoid Valve Overcurrent.
- [18\-010\-15 REV\-C](/bulletins/10148991.md), 2018-11-26, Service bulletin: ELECTRICAL SYSTEM:SOFTWARE; ELECTRICAL SYSTEM; ELECTRICAL SYSTEM:STARTER ASSEMBLY:SOLENOID; POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE \(TCM/PCM/TECM\). Flash:1.4L Diagnostic And System Improvements This bulletin involves reprogramming the Powertrain Control Module \(PCM\) with the latest software. The customers may experience a Malfunction Indicator Lamp \(MIL\) illumination. Upon further investigation the technician may find one or more of the following Diagnostic Trouble Codes \(DTCs\): ? P0141 Oxygen Sensor 1/2 Heater Performance \(software has been updated to better address this DTC, for EAB engines\). ? P1046 \- Cylinder 1 Oil Supply Solenoid Valve Overcurrent. ? P1048 \- Cylinder 2 Oil Supply Solenoid Valve Overcurrent. ? P104A \- Cylinder 3 Oil Supply Solenoid Valve Overcurrent. ? P104C \- Cylinder 4 Oil Supply Solenoid Valve Overcurrent. ? P061A Internal Control Module Torque Performance \(2014 Vehicles only\). ? Improved reverse lamp activation time \(2015 auto trans only\). ? Improved cold weather starting, below \-4 °F \(\-20 °C\).
- [08\-103\-14 REV. A](/bulletins/10139889.md), 2018-06-11, Service bulletin: EQUIPMENT:ELECTRICAL:NAVIGATIONAL SYSTEM\(GLOBAL POSITIONING SYSTEM\); ELECTRICAL SYSTEM:SOFTWARE. Convergence Telematics Module \(CTM\) Software Enhancements This bulletin involves updating the Convergence Telematics Module \(CTM\) software. The customer may notice the steering wheel controls and USB functionality may not operate properly after the ignition is cycled.
- [08\-103\-14](/bulletins/10139863.md), 2018-06-11, Service bulletin: STEERING; ELECTRICAL SYSTEM:SOFTWARE. Convergence Telematics Module \(CTM\) Software Enhancements This bulletin involves updating the Convergence Telematics Module \(CTM\) software. The customer may notice the steering wheel controls and USB functionality may not operate properly after the ignition is cycled.
- [08\-101\-14](/bulletins/10139852.md), 2018-06-11, Service bulletin: ELECTRICAL SYSTEM:SOFTWARE. Convergence Telematics Module \(CTM\) Software Enhancements This bulletin involves inspecting and if required, replacement of the \(CTM\). The customer may notice that the displays on the TomTom screen may be missing some Battery Electric Vehicle \(BEV\) features. Charging schedule screen, power flow screen and charging station icon may be missing.

JSON: [/v1/bulletins/10057936](/v1/bulletins/10057936)

[Report an error on this page](https://github.com/wenmar-pro/wenmar-open/issues/new?template=data_correction.yml&title=Data%20correction%3A%20Service%20bulletin%2008-004-15%20REV.A&page=https%3A%2F%2Fopen.wenmarpro.com%2Fbulletins%2F10057936&vehicle=Service%20bulletin%2008-004-15%20REV.A)