Service bulletin RB-14858
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
| Type | Service bulletin |
|---|---|
| NHTSA id | 10057680 |
| Published by NHTSA | 2015-06-19 |
| Manufacturer's number | RB-14858 |
| Manufacturer's date | 2015-02-01 |
| NHTSA component | FUEL SYSTEM, OTHER:DELIVERY:FUEL PUMP; FUEL SYSTEM, GASOLINE:DELIVERY:FUEL PUMP |
NHTSA's summary
CADILLAC/GMC/CHEVROLET: TSB CONTAINS OWNER NOTIFICATION LETTER. SELECT DOCUMENT SEARCH BUTTON BELOW. THERE IS FUEL ODOR AND INCREASED EVAPORATIVE EMISSIONS DUE TO HIGH PRESSURE FUEL PUMP LEAKING AND ENGINE FAILS TO START OR WHEN DRIVEN HAS LESS POWER DUE TO INSUFFICIENT FUEL PRESSURE. MODEL 2014-14 SILVERADO LD, SIERRA LD, 2015 ESCALADE, ESV, SUBURBAN, TAHOE, YUKON, YUKON XL, CORVETTE. *PE
The document
No address for NHTSA's copy can be built for this communication. Ask the dealer for it by the manufacturer's number.
Components
Fuel system, Fuel pump
| CADILLAC ESCALADE | 2015 |
|---|---|
| CADILLAC ESCALADE ESV | 2015 (the catalog's model; the bulletin names a series or trim of it) |
| CADILLAC SRX | 2015 |
| CADILLAC XTS | 2015 |
| CHEVROLET SILVERADO | 2014, 2015 |
| CHEVROLET SUBURBAN | 2014, 2015 |
| GMC SIERRA | 2014, 2015 |
| GMC YUKON | 2015 |
| GMC YUKON XL | 2014 (the catalog's model; the bulletin names a series or trim of it) |
Listing a model year does not mean every vehicle of it is concerned: the document says which.
| 18NA235 | 2022-05-31. Service bulletin. This information bulletin advised the tech of possible use of low fuel quality and the possible ramifications in performance in regards to the customers concerns. |
|---|---|
| PIE0523 | 2019-07-01. Service bulletin. This engineering informational bulletin is requesting information for vehicles that has had the fuel injection pump replaced and is still within warranty. |
| PIP5596 | 2018-11-13. Service bulletin. This Preliminary information communicates that when removing the fuel line jumper hose care should be taken to be sure the line is reinstalled correctly to avoid a no/low fuel pressure situation. |
| 07-06-04-025J | 2018-06-11. Service bulletin. This informational bulletin was created to inform the technician of cold start ticking noises in the engine compartment may be caused by the fuel pump and/or the fuel injectors and no |
| 07-06-04-025J | 2018-05-29. Service bulletin. This informational bulletin was created to inform the technician of cold start ticking noises in the engine compartment may be caused by the fuel pump and/or the fuel injectors and no |
| 17NA335 | 2018-04-23. Service bulletin. This technical bulletin provides a procedure to replace the fuel pump to correct the MIL concerns. |
| PIP5385D | 2018-02-21. Service bulletin. This Preliminary Information communication advises the technician on the steps to diagnose the concern, and the steps to repair the concern of Diagnostic Trouble Code P228C setting. The technician is to inspect the fuel and readings for the High Pressure Fuel Pump. The technician is to drain and clean fuel tank and all lines if contamination is found. The technician is to replace the high pressure fuel pump and the fuel inlet line to the high pressure fuel pump. The dealer is to request the customer complete the fuel survey attached and send to the fuel system engineer at the e-mail address provided. Latest revision added model years to the PI with no other changes. New revision adds model year and removes the customer surveys. |
| PIP5411F | 2017-11-14. Service bulletin. This Preliminary Information communication provides information to the technician about vehicles that may have hesitation or a stalling condition while in ambient temperatures 100 degrees or higher. Technician may find Diagnostic Trouble Codes P2635 and or P018B set. The dealer is advised to replace the in tank fuel pump module assembly to correct the condition. |
| PIP4949E | 2017-08-15. Service bulletin. This Preliminary Information communication provides information to the technician about vehicles that have a hard start or a no start. Technician may find Diagnostic Trouble Code DTCs P0087, P0088, P0191 or P128E. Technician will need to follow all Service Information diagnose for the Diagnostic Trouble Code. If the current Service Information diagnostic has led to Fuel Injection Pump replacement, Fuel Pressure Regulator 1 must be inspected for magnetic metal debris. If there is a questionable amount of magnetic debris found on Pressure Regulator 1 remove the Fuel Rail Pressure Sensor and/or Fuel Pressure Regulator 2 to inspect for magnetic metal debris. If technician will need to replace all of the parts listed under the latest version of PIP4949 found in the Service Forms section of Global Connect if debris is found. Clean and flush all fuel chassis lines, filter pipes, and other engine mounted fuel system pipes not replaced. Also the fuel filter housing must be cleaned with a new fuel filter installed. Then the fuel tank and fuel sender must be cleaned and flushed. |
| PIP5133C | 2017-08-15. Service bulletin. This Preliminary Information communication advises the technician that the 6.6L Duramax Diesel Engine Fuel Injection Pump Part numbers 12645102, 12658095 and 12661059 will be placed on a parts restriction through the General Motors Product Quality Center. Dealer will need to contact General Motors Product Quality Center for further assistance. |