# Service bulletin PIC\-5931\-B

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

- Type: Service bulletin
- NHTSA id: 10056477
- Published by NHTSA: 2014\-12\-12
- Manufacturer's number: PIC\-5931\-B
- Manufacturer's date: 2014\-09\-01
- NHTSA component: ELECTRICAL SYSTEM:SOFTWARE; ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL

## NHTSA's summary

CHEVROLET: SOME VEHICLES EXPERIENCING INCORRECT OR INACCURATE AMBIENT AIR TEMPERATURE READING AND IPC NEEDS TO BE REPROGRAMMED. MODEL 2014 CAMARO. \*PE

## The document

No address for NHTSA's copy can be built for this communication. Ask the dealer for it by the manufacturer's number.

## Components

Electrical system, Instrument cluster, Software

## Vehicles listed

- 2000 to 2002 CHEVROLET CAMARO
- 2010 to 2013 CHEVROLET CAMARO

## Other bulletins for the same vehicles and component

- [20\-NA\-132](/bulletins/10252774.md), 2024-04-05, Service bulletin: ELECTRICAL SYSTEM; ELECTRICAL SYSTEM:12V/24V/48V BATTERY; ELECTRICAL SYSTEM:SOFTWARE; EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL; EQUIPMENT. This warranty administration bulletin provides policy information on the requirements for 12V battery testing and warranty replacements.
- [PIC5718C](/bulletins/10247001.md), 2023-12-11, Service bulletin: ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL. Instrument Panel \(IP\) Center Soft Insert Above Radio Center Stack Appears Deformed
- [PIC5718B](/bulletins/10247000.md), 2023-12-11, Service bulletin: ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL. Instrument Panel \(IP\) Center Soft Insert Above Radio Center Stack Appears Deformed
- [PIC5718A](/bulletins/10246999.md), 2023-12-11, Service bulletin: ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL. Instrument Panel \(IP\) Center Soft Insert Above Radio Center Stack Appears Deformed
- [PIC5687C](/bulletins/10246982.md), 2023-12-11, Service bulletin: ELECTRICAL SYSTEM:SOFTWARE. Checking Smartphone Bluetooth Software Update Status
- [130089003](/bulletins/10246614.md), 2023-12-11, Service bulletin: ELECTRICAL SYSTEM:SOFTWARE. Vehicle Software Enhancements
- [07\-08\-49\-020R](/bulletins/10244214.md), 2023-10-18, Service bulletin: ELECTRICAL SYSTEM; EQUIPMENT; ELECTRICAL SYSTEM:INSTRUMENT PANEL:SPEEDOMETER/ODOMETER. This informational bulletin provides information for the IPC odometer programming method quick reference guide.
- [PIP5632G](/bulletins/10230683.md), 2023-01-30, Service bulletin: ELECTRICAL SYSTEM:SOFTWARE; EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL. This Preliminary Information communication provides information to the technician that General Motors Technical Assistance Center may ask for Global Diagnostic System 2 Session Log. Technician will need use Global Diagnostic System 2 to send the session logs to General Motors Technical Assistance Center for further assistance on the vehicle in question.
- [PIP4902Q](/bulletins/10230682.md), 2023-01-30, Service bulletin: ELECTRICAL SYSTEM:SOFTWARE; EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL. This Preliminary Information communication provides information to the technician that General Motors Technical Assistance Center may ask for Global Diagnostic System 2 Session Log. Technician will need use Global Diagnostic System 2 to send the session logs to General Motors Technical Assistance Center for further assistance on the vehicle in question.
- [07\-08\-49\-020J](/bulletins/10190504.md), 2021-04-20, Service bulletin: ELECTRICAL SYSTEM:INSTRUMENT PANEL:SPEEDOMETER/ODOMETER; EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL. IPC Odometer Programming Method Quick Reference Guide Season Odometer Programming Methods in Use Today 1. IPC reprogramming and setup using the service programming system \(SPS\). 2. Odometer setup at the electronic service center \(ESC\) when using an exchange IPC/DIC. 3. Tech 2® – The Tech 2 is used to set up a replacement BCM, which includes loading the odometer value that is displayed and stored in the IPC. A replacement IPC will display the previously stored vehicle odometer value, communicated from the BCM, after cycling the ignition or driving the vehicle. \*The odometer programming is integrated as part of the BCM programming procedure. It is not a stand\-alone event.

JSON: [/v1/bulletins/10056477](/v1/bulletins/10056477)

[Report an error on this page](https://github.com/wenmar-pro/wenmar-open/issues/new?template=data_correction.yml&title=Data%20correction%3A%20Service%20bulletin%20PIC-5931-B&page=https%3A%2F%2Fopen.wenmarpro.com%2Fbulletins%2F10056477&vehicle=Service%20bulletin%20PIC-5931-B)