WenmarOpen by Wenmar Pro

Service bulletin ASI-44538

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

The communication, as NHTSA indexes it (as of 2026-10-19)
TypeService bulletin
NHTSA id10056191
Published by NHTSA2014-10-01
Manufacturer's numberASI-44538
Manufacturer's date2014-05-01
NHTSA componentPOWER TRAIN:AUTOMATIC TRANSMISSION

NHTSA's summary

FORD/LINCOLN/MERCURY: THE INDICATOR MAY ILLUMINATE OVERDRIVE OFF AND/OR SLIPPING IN 3RD OR NO 4TH GEAR, DUE TO DIRECT CLUTCH FAILURE AND DIAGNOSTIC TROUBLE CODE (DTC) P0733 AND/OR P0734. MODEL 2008-2013 MARK LT, F-150, CROWN VICTORIA, GRAND MARQUIS, TOWN CAR, E SERIES. *PE

The document

No address for NHTSA's copy can be built for this communication. Ask the dealer for it by the manufacturer's number.

Components

Transmission and driveline, Automatic transmission

Trouble codes named

P0733, P0734

Vehicles listed
FORD CROWN VICTORIA2008, 2009, 2010, 2011
FORD E-1502008, 2009, 2010, 2011, 2012, 2013
FORD E-2502008, 2009, 2010, 2011, 2012, 2013
FORD E-3502008, 2009, 2010, 2011, 2012, 2013
FORD E-4502008, 2009, 2010, 2011, 2012, 2013
FORD E-5502008 to 2009
FORD F-1502008, 2009, 2010
LINCOLN MARK LT2008
LINCOLN TOWN CAR2008, 2009, 2010, 2011
MERCURY GRAND MARQUIS2008, 2009, 2010, 2011

Listing a model year does not mean every vehicle of it is concerned: the document says which.

Other bulletins for the same vehicles and component
SSM 519092023-10-04. Service bulletin. When performing any transmission fluid changes or topoffs involving MERCON SP, MERCON LV has replaced all versions of MERCON SP and can be used going forward. Mixing MERCON LV and MERCON SP in the same transmission is acceptable. After 30-Jun-2023, MERCON SP ATF will no longer be manufactured and will only be available until inventory depletes.
SSM 518542023-09-04. Service bulletin. Various 2013-2019 vehicles may exhibit an illuminated malfunction indicator lamp (MIL) with diagnostic trouble code (DTC) P264F after powertrain control module (PCM) replacement. This DTC indicates that the engine serial number (ESN) must be programmed into the PCM. The ESN is located on PTS > Diagnostics tab > HVBoM > Features > Engine Serial Number. Once the ESN is obtained from the historical vehicle bill of materials (HvBOM), it can be programmed into the PCM using the appropriate Ford diagnostic scan tool. Navigate to the toolbox tab> powertrain menu> Service Functions> ESN.
SSM 518492023-09-01. Service bulletin. Various 2013-2019 vehicles may exhibit an illuminated malfunction indicator lamp (MIL) with diagnostic trouble code (DTC) P264F after powertrain control module (PCM) replacement. This DTC indicates that the engine serial number (ESN) must be programmed into the PCM. The ESN is located on PTS> OASIS> Features> Engine Serial Number. Once the ESN is obtained from the historical vehicle bill of materials (HvBOM), it can be programmed into the PCM using the appropriate Ford diagnostic scan tool. Navigate to the toolbox tab> powertrain menu> Service Functions> ESN.
SSM 469002018-01-29. Service bulletin. Some vehicles may exhibit a no start condition with an illuminated malfunction indicator lamp (MIL) and a DTC P161A after PCM replacement. This may be due to the parameter reset procedure not being properly completed. To clear this DTC, use the Ford Integrated Diagnostic System (IDS) service tool or Ford J2534 Diagnostic Software, select - Toolbox - Body - Security - PATS Functions - Parameter Reset. Follow the on-screen instructions to complete the procedure. This procedure will transfer the existing Key ID information between the modules without the need of having 2 programmed PATS keys present. There is no need to program keys when the PCM is going to be replaced. Additional information can be found in the Workshop Manual (WSM), Section 419-01. Missing or lost keys are not warrantable.
SSM 464512017-05-17. Service bulletin. 2009-2017 VEHICLES EQUIPPED WITH A 6R80, 6R100, 6R140 AUTOMATIC TRANSMISSION HAVE AN UPDATED MAIN CONTROL VALVE BODY OVERHAUL PROCEDURE. REFER TO WORKSHOP MANUAL (WSM), SECTION 307-01 FOR MAIN CONTROL VALVE BODY (7A100) OVERHAUL PROCEDURES. NOT ALL VALVE BODIES REQUIRE REPLACEMENT. INSPECT THE VALVE BODY BORES, SPRINGS AND VALVES AS DIRECTED DURING DIAGNOSIS AND REPAIR. REFER TO GENERAL SERVICE BULLETIN (GSB) G0000093 AUTOMATIC TRANSMISSION MAIN CONTROL INSPECTION FOR A VIDEO CLIP TO AID IN THE DIAGNOSIS OF THESE REPAIRS.
15-01162015-08-20. Service bulletin. FORD 2011-2016 F-250,350,450,550: SOME VEHICLES MAY EXPERIENCE MULTIPLE DIAGNOSTIC CODES STORED IN THE POWER CONTROL MODULE MEMORY DUE TO CRYSTALS DEVELOPING ON THE INJECTOR NOZZLE. *LJ
TSB-14-01532015-02-03. Service bulletin. FORD/LINCOLN/MERCURY: FAILURE OF PLANETARY GEAR ASSEMBLY IS DUE TO TRANSMISSION, ON CERTAIN VEHICLES, EXHIBITING GRINDING, GEAR SLIPPAGE, WHINE TYPE NOISE, VIBRATION, WHILE DRIVING OR LOSS OF REVERSE. *PE
ASI-445342014-10-01. Service bulletin. FORD: WHEN SHIFTING BETWEEN PARK, REVERSE AND/OR DURING 2-3 SHIFT, AN INTERMITTENT CLUNK OCCURS WITH A TORQSHIFT TRANSMISSION. MODEL 2003-2014 F-SUPER DUTY, E SERIES, EXCURSION, F-53 MOTORHOME CHASSIS, LOW CAB FORWARD. *PE
TSB-14-00692014-07-17. Service bulletin. LINCOLN/MERCURY/FORD: THERE IS FLUID LEAKING AROUND THE TRANSMISSION BULKHEAD CONNECTOR SLEEVE, FROM THE TRANSMISSION. MODEL 2009-10 EXPEDITION, EXPLORER, EXPLORER SPORT TRAC, F-150, NAVIGATOR, MOUNTAINEER. *PE
ASI-444042014-06-24. Service bulletin. FORD: ON SOME TRUCKS, THERE IS A NO CRANK SITUATION AND IF VOLTAGE ON TRANSMISSION RANGE SENSOR AT PIN 21, IS LESS THAN 5 VOLTS, DISCONNECT THE ENGINE COOLING FAN CLUTCH, ELECTRONICALLY, AND RECHECK VOLTAGE. MODEL 2003-2007 F SUPER DUTY, 2004-2010 E SERIES, 2003-2005 EXCURSION.