# Service bulletin TSB\-14\-0092

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

- Type: Service bulletin
- NHTSA id: 10055883
- Published by NHTSA: 2014\-08\-04
- Manufacturer's number: TSB\-14\-0092
- Manufacturer's date: 2014\-05\-01
- NHTSA component: POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE \(TCM/PCM/TECM\); ELECTRICAL SYSTEM:SOFTWARE; ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL

## NHTSA's summary

FORD: THE INSTRUMENT PANEL CLUSTER \(IPC\) IS ILLUMINATED WITH WARNING MESSAGE DISPLAYING EXHAUST FLUID SYSTEM FAULT AND POWERTRAIN CONTROL MODULE \(PCM\) SOFTWARE HAS IMPROVED MONITORS WITH AVAILABLE CALIBRATION. MODEL 2011\-2012 F\-SUPER DUTY. \*PE

## The document

No address for NHTSA's copy can be built for this communication. Ask the dealer for it by the manufacturer's number.

## Components

Electrical system, Transmission and driveline, Automatic transmission, Instrument cluster, Software, Transmission control module

## Vehicles listed

- 2011 to 2012 FORD F\-250 SD
- 2011 to 2012 FORD F\-350 SD
- 2011 to 2012 FORD F\-450 SD
- 2011 to 2012 FORD F\-550 SD
- 2011 to 2012 FORD F\-650 SD
- 2011 to 2012 FORD F\-750 SD

## Recalls for the same vehicles and component

- [15V175000](/recalls/nhtsa/15V175000.md), 2015-03-25: POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE \(TCM/PCM/TECM\)
- [11V582000](/recalls/nhtsa/11V582000.md), 2011-12-08: POWER TRAIN:AUTOMATIC TRANSMISSION
- [11V128000](/recalls/nhtsa/11V128000.md), 2011-02-24: ELECTRICAL SYSTEM:SOFTWARE

## Other bulletins for the same vehicles and component

- [23B63](/bulletins/10248068.md), 2024-01-02, Service bulletin: BACK OVER PREVENTION; POWER TRAIN:MANUAL TRANSMISSION:CONTROL MODULE \(TCM/PCM/TECM\). Certain 2011\-2012 Model Year F\-Series Super Duty Vehicles Equipped with 6.7L Diesel Engine State Inspection and Maintenance Testing Failure Due to DTCs P2073 and/or P2074
- [SSM 50636](/bulletins/10209384.md), 2022-03-29, Service bulletin: POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE:SOFTWARE; ENGINE AND ENGINE COOLING; EQUIPMENT. 2011\-2022 F\-Super Duty and 2016\-2023 F\-650/F\-750 vehicles equipped with a 6.7L engine may exhibit an elevated idle condition. During prolonged idle time, vehicles may experience this elevated idle to reduce unburned hydrocarbons from the SCR. The powertrain control module estimates hydrocarbon levels in the SCR and may increase idle speed to remove them. Idle speed will be increased to 1000 RPM for ambient temperatures near 26°C \(80°F\) and may increase to 1200 RPM at \-40 °C \(\-40°F\). Vehicles may exhibit exhaust smoke and diesel exhaust fluid smell during elevated idle condition. Exhaust smoke and smell condition will not affect reliability or durability of the engine. Power take\-off \(PTO\) use and idle set point control will disable elevated speed. It is required that the operator monitor the vehicle and adhere to any Exhaust Filter warning messages.
- [16\-0060](/bulletins/10183761.md), 2020-12-07, Service bulletin: POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE:SOFTWARE. Some 2012\-2016 F\-Super Duty vehicles equipped with a 6.2L or 6.8L engine built on or before 4/6/2016 may exhibit an illuminated malfunction indicator lamp \(MIL\) with DTCs P0627, P025A, P025B and/or U0109 stored in powertrain control module \(PCM\) memory.
- [18U12](/bulletins/10137150.md), 2018-05-21, Service bulletin: POWER TRAIN:AUTOMATIC TRANSMISSION. Certain 2018 Model Year Escape and MKC Vehicles \- Transmission Bell Housing Bolt TorqueCertain 2012\-2016 Model Year F\-450 ? F\-750 and F\-59 Commercial Stripped Chassis Vehicles Equipped with a 6.8L Engine \- Camshaft Roller Follower Replacement
- [SSM 46900](/bulletins/10127405.md), 2018-01-29, Service bulletin: POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE \(TCM/PCM/TECM\); ELECTRICAL SYSTEM. Some vehicles may exhibit a no start condition with an illuminated malfunction indicator lamp \(MIL\) and a DTC P161A after PCM replacement. This may be due to the parameter reset procedure not being properly completed. To clear this DTC, use the Ford Integrated Diagnostic System \(IDS\) service tool or Ford J2534 Diagnostic Software, select \- Toolbox \- Body \- Security \- PATS Functions \- Parameter Reset. Follow the on\-screen instructions to complete the procedure. This procedure will transfer the existing Key ID information between the modules without the need of having 2 programmed PATS keys present. There is no need to program keys when the PCM is going to be replaced. Additional information can be found in the Workshop Manual \(WSM\), Section 419\-01. Missing or lost keys are not warrantable.
- [SSM 46451](/bulletins/10099463.md), 2017-05-17, Service bulletin: POWER TRAIN:AUTOMATIC TRANSMISSION. 2009\-2017 VEHICLES EQUIPPED WITH A 6R80, 6R100, 6R140 AUTOMATIC TRANSMISSION HAVE AN UPDATED MAIN CONTROL VALVE BODY OVERHAUL PROCEDURE. REFER TO WORKSHOP MANUAL \(WSM\), SECTION 307\-01 FOR MAIN CONTROL VALVE BODY \(7A100\) OVERHAUL PROCEDURES. NOT ALL VALVE BODIES REQUIRE REPLACEMENT. INSPECT THE VALVE BODY BORES, SPRINGS AND VALVES AS DIRECTED DURING DIAGNOSIS AND REPAIR. REFER TO GENERAL SERVICE BULLETIN \(GSB\) G0000093 AUTOMATIC TRANSMISSION MAIN CONTROL INSPECTION FOR A VIDEO CLIP TO AID IN THE DIAGNOSIS OF THESE REPAIRS.
- [TSB 16\-0154](/bulletins/10095963.md), 2017-03-20, Service bulletin: POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE \(TCM/PCM/TECM\). SOME 2011\-2016 F\-SUPER DUTY VEHICLES EQUIPPED WITH A 6.7L DIESEL ENGINE, MAY EXHIBIT AN ILLUMINATED MIL WITH DTCS P208E AND/OR P218F STORED IN THE POWERTRAIN CONTROL MODULE \(PCM\) MEMORY DUE TO UREA CRYSTALS FORMING ON THE REDUCTANT INJECTOR NOZZLE. FOLLOW THE SERVICE PROCEDURE STEPS TO CORRECT THE CONDITION.
- [16B24](/bulletins/10091152.md), 2017-02-10, Service bulletin: ELECTRICAL SYSTEM:SOFTWARE; POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE \(TCM/PCM/TECM\). CERTAIN 2011\-2012 MODEL YEAR F\-SUPER DUTY CHASSIS CAB VEHICLES EQUIPPED WITH A 6.7L DIESEL ENGINE \- POWERTRAIN CONTROL MODULE REPROGRAMMING
- [45013](/bulletins/10058227.md), 2015-08-17, Service bulletin: ELECTRICAL SYSTEM:SOFTWARE. FORD F\-SUPER DUTY 2011\-2015\- 6.7L DIESEL: BULLETIN INFORMATION REGARDING MALFUNCTION INDICATOR LAMP DUE TO MODIFIED, MISSING, DAMAGED, OR LOOSE GROUND G400, WITH TROUBLE CODES , P20BC, P20C0, P204C, P208A, P208B, P220E, P130E. \*LJ
- [44967](/bulletins/10058204.md), 2015-08-14, Service bulletin: ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL. FORD 2011\-2014 6.7L F\-SUPER DUTY: SERVICE INFORMATION REGARDING INSTRUMENT PANEL CLUSTER DRIVE TO CLEAN EXHAUST SYATEM MESSAGE AFTER PCM UPDATE FROM FSA 14E03. \*LJ

JSON: [/v1/bulletins/10055883](/v1/bulletins/10055883)

[Report an error on this page](https://github.com/wenmar-pro/wenmar-open/issues/new?template=data_correction.yml&title=Data%20correction%3A%20Service%20bulletin%20TSB-14-0092&page=https%3A%2F%2Fopen.wenmarpro.com%2Fbulletins%2F10055883&vehicle=Service%20bulletin%20TSB-14-0092)