WenmarOpen by Wenmar Pro

Service bulletin TSB-14-01-005

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

The communication, as NHTSA indexes it (as of 2026-10-19)
TypeService bulletin
NHTSA id10055337
Published by NHTSA2014-05-10
Manufacturer's numberTSB-14-01-005
Manufacturer's date2014-01-01
NHTSA componentENGINE

NHTSA's summary

HYUNDAI: THE LOGIC FOR ACCELERATION FEEL AT COLD ENGINE CONDITION IS REVISED DUE TO AN ECM UPDATE FOR SOME VEHICLES. MODEL 2013 GENESIS. *PE

The document

No address for NHTSA's copy can be built for this communication. Ask the dealer for it by the manufacturer's number.

Components

Engine

Vehicles listed
HYUNDAI GENESIS2013

Listing a model year does not mean every vehicle of it is concerned: the document says which.

Other bulletins for the same vehicles and component
26-EM-015H TSB2026-10-13. Service bulletin. Certain vehicles equipped with internal combustion engines may exhibit higher-than-expected engine oil consumption. This bulletin provides the inspection and repair procedures for vehicles exhibiting this condition. All internal combustion engines consume engine oil as part of normal engine operation. Oil consumption rates may vary based on mileage, operating conditions, driving habits, and maintenance history. Hyundai recommends following the prescribed maintenance schedule and periodically checking the engine oil level using the dipstick to maintain proper engine oil level.
23-EM-005H2023-12-15. Service bulletin. This bulletin provides important checkpoint guidelines when performing engine oil and filter change services.
22-EM-010H2022-08-05. Service bulletin. Follow the guidelines outlined in this bulletin to inspect and clean or replace certain components of the engine intake system accordingly during engine short block or sub-assembly replacement.
21-EM-004H2021-04-07. Service bulletin. This bulletin provides the service procedure for engine connecting rod bearing clearance testing. Perform the procedure outlined in this bulletin to fulfill the Bearing Clearance Test inspection requirements to determine next required steps.
21-EM-003H2021-04-06. Service bulletin. This bulletin provides the inspection procedure and repair guidelines for certain vehicles listed below.
19-EM-001H2019-11-18. Service bulletin. This bulletin provides information regarding the changes in the timing chain and the crankshaft sprockets on certain Azera (HG), Santa Fe/Santa Fe XL (NC), Genesis (BH/DH), Genesis Coupe (BK), and G90 (HI) vehicles equipped with Lambda 3.3L / 3.8L GDI engines.
19-AT-008H2019-05-20. Service bulletin. When servicing a vehicle with a ?Check Engine light? and any of the DTCs listed below, follow the Service Procedure and replace the related solenoid and E-module.
19-AT-005H2019-04-22. Service bulletin. If you are servicing a vehicle with a ?Check Engine light? and any of the DTCs listed below, follow the Service Procedure and replace the E-module.
TSB-14-01-0292014-12-13. Service bulletin. HYUNDAI: INFORMATION IS PROVIDED REGARDING THE ECM SOFTWARE UPDATE FOR CERTAIN VEHICLES, WITH DELPHI CAMSHAFT SENSOR THAT ARE EXPERIENCING A MALFUNCTION INDICATOR LAMP (MIL). MODEL 2014 GENESIS COUPE. *PE