WenmarOpen by Wenmar Pro

Service bulletin CIS-13-11-6

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

The communication, as NHTSA indexes it (as of 2026-10-19)
TypeService bulletin
NHTSA id10054365
Published by NHTSA2014-01-15
Manufacturer's numberCIS-13-11-6
Manufacturer's date2014-01-15
NHTSA componentPOWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM); ELECTRICAL SYSTEM:SOFTWARE; ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL

NHTSA's summary

FORD: THERE IS A SOFTWARE UPDATE REGARDING REVISED CALIBRATION ON POWERTRAIN ENGINE CONTROL MODULE FOR DIESEL PARTICULATE FILTER (DPF) REGENERATION PROCESS AND INSTRUMENT CLUSTER MESSAGING FOR SOME TRUCKS. MODEL 2012 F-450, 440 SUPER DUTY. *PE

The document

No address for NHTSA's copy can be built for this communication. Ask the dealer for it by the manufacturer's number.

Components

Electrical system, Transmission and driveline, Automatic transmission, Instrument cluster, Software, Transmission control module

Vehicles listed
FORD F-450 SD2012 (the catalog's model; the bulletin names a series or trim of it)
FORD F-550 SD2012 (the catalog's model; the bulletin names a series or trim of it)

Listing a model year does not mean every vehicle of it is concerned: the document says which.

Recalls for the same vehicles and component
15V1750002015-03-25. POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM)
11V5820002011-12-08. POWER TRAIN:AUTOMATIC TRANSMISSION

A recall listed here may apply to some of the same vehicles. Only the manufacturer can say whether it applies to one vehicle.

Other bulletins for the same vehicles and component
23B632024-01-02. Service bulletin. Certain 2011-2012 Model Year F-Series Super Duty Vehicles Equipped with 6.7L Diesel Engine State Inspection and Maintenance Testing Failure Due to DTCs P2073 and/or P2074
SSM 506362022-03-29. Service bulletin. 2011-2022 F-Super Duty and 2016-2023 F-650/F-750 vehicles equipped with a 6.7L engine may exhibit an elevated idle condition. During prolonged idle time, vehicles may experience this elevated idle to reduce unburned hydrocarbons from the SCR. The powertrain control module estimates hydrocarbon levels in the SCR and may increase idle speed to remove them. Idle speed will be increased to 1000 RPM for ambient temperatures near 26°C (80°F) and may increase to 1200 RPM at -40 °C (-40°F). Vehicles may exhibit exhaust smoke and diesel exhaust fluid smell during elevated idle condition. Exhaust smoke and smell condition will not affect reliability or durability of the engine. Power take-off (PTO) use and idle set point control will disable elevated speed. It is required that the operator monitor the vehicle and adhere to any Exhaust Filter warning messages.
16-00602020-12-07. Service bulletin. Some 2012-2016 F-Super Duty vehicles equipped with a 6.2L or 6.8L engine built on or before 4/6/2016 may exhibit an illuminated malfunction indicator lamp (MIL) with DTCs P0627, P025A, P025B and/or U0109 stored in powertrain control module (PCM) memory.
SSM 469002018-01-29. Service bulletin. Some vehicles may exhibit a no start condition with an illuminated malfunction indicator lamp (MIL) and a DTC P161A after PCM replacement. This may be due to the parameter reset procedure not being properly completed. To clear this DTC, use the Ford Integrated Diagnostic System (IDS) service tool or Ford J2534 Diagnostic Software, select - Toolbox - Body - Security - PATS Functions - Parameter Reset. Follow the on-screen instructions to complete the procedure. This procedure will transfer the existing Key ID information between the modules without the need of having 2 programmed PATS keys present. There is no need to program keys when the PCM is going to be replaced. Additional information can be found in the Workshop Manual (WSM), Section 419-01. Missing or lost keys are not warrantable.
SSM 464512017-05-17. Service bulletin. 2009-2017 VEHICLES EQUIPPED WITH A 6R80, 6R100, 6R140 AUTOMATIC TRANSMISSION HAVE AN UPDATED MAIN CONTROL VALVE BODY OVERHAUL PROCEDURE. REFER TO WORKSHOP MANUAL (WSM), SECTION 307-01 FOR MAIN CONTROL VALVE BODY (7A100) OVERHAUL PROCEDURES. NOT ALL VALVE BODIES REQUIRE REPLACEMENT. INSPECT THE VALVE BODY BORES, SPRINGS AND VALVES AS DIRECTED DURING DIAGNOSIS AND REPAIR. REFER TO GENERAL SERVICE BULLETIN (GSB) G0000093 AUTOMATIC TRANSMISSION MAIN CONTROL INSPECTION FOR A VIDEO CLIP TO AID IN THE DIAGNOSIS OF THESE REPAIRS.
TSB 16-01542017-03-20. Service bulletin. SOME 2011-2016 F-SUPER DUTY VEHICLES EQUIPPED WITH A 6.7L DIESEL ENGINE, MAY EXHIBIT AN ILLUMINATED MIL WITH DTCS P208E AND/OR P218F STORED IN THE POWERTRAIN CONTROL MODULE (PCM) MEMORY DUE TO UREA CRYSTALS FORMING ON THE REDUCTANT INJECTOR NOZZLE. FOLLOW THE SERVICE PROCEDURE STEPS TO CORRECT THE CONDITION.
16B242017-02-10. Service bulletin. CERTAIN 2011-2012 MODEL YEAR F-SUPER DUTY CHASSIS CAB VEHICLES EQUIPPED WITH A 6.7L DIESEL ENGINE - POWERTRAIN CONTROL MODULE REPROGRAMMING
449672015-08-14. Service bulletin. FORD 2011-2014 6.7L F-SUPER DUTY: SERVICE INFORMATION REGARDING INSTRUMENT PANEL CLUSTER DRIVE TO CLEAN EXHAUST SYATEM MESSAGE AFTER PCM UPDATE FROM FSA 14E03. *LJ
TSB-14-01772015-08-01. Service bulletin. FORD: THERE IS A DELAYED TRANSMISSION ENGAGEMENT, INTERMITTENTLY, IN EITHER DRIVE OR REVERSE DUE TO ENGINE BEING OFF FOR 2-3 HOURS OR PUMP IS LOSING PRIME. MODEL 2011-12 F SUPER DUTY. *PE
15-00422015-07-07. Service bulletin. FORD 2011-2012 F250, F350, F450, F550 : INFORMATION REGARDING F-SUPER DUTY VEHICLES EQUIPPED WITH A 6.7L ENGINE AND BUILT BEFORE 10/11/2011 MAY EXHIBIT A MIL ON WITH DTCS, P207F, P20EE, P2200, P2201, P2209, P164A, P2A00 OR P0133. *LJ