# Service bulletin ITB\-13\-039

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

- Type: Service bulletin
- NHTSA id: 10054302
- Published by NHTSA: 2014\-01\-09
- Manufacturer's number: ITB\-13\-039
- Manufacturer's date: 2013\-09\-26
- NHTSA component: TIRES:PRESSURE MONITORING AND REGULATING SYSTEMS

## NHTSA's summary

INFINITI: SERVICE BULLETIN CONCERNING LOW TIRE PRESSURE WARNING SYSTEM INFORMATION. \*JS

## The document

No address for NHTSA's copy can be built for this communication. Ask the dealer for it by the manufacturer's number.

## Components

Tires, Tire pressure monitoring

## Vehicles listed

- 2010 to 2011 INFINITI EX35
- 2010 INFINITI FX35
- 2011 INFINITI FX35
- 2012 INFINITI FX35
- 2013 INFINITI FX35
- 2010 to 2013 INFINITI FX50
- 2011 to 2012 INFINITI G25
- 2010 to 2012 INFINITI G37
- 2013 INFINITI JX
- 2013 INFINITI JX35
- 2010 INFINITI M35
- 2012 to 2013 INFINITI M35 HYBRID
- 2011 to 2013 INFINITI M37
- 2011 to 2013 INFINITI M37 HYBRID
- 2010 INFINITI M45
- 2011 to 2013 INFINITI M56
- 2011 to 2013 INFINITI M56 HYBRID
- 2014 INFINITI Q50
- 2014 INFINITI Q50 HYBRID
- 2011 to 2012 INFINITI QX
- 2010 to 2013 INFINITI QX56
- 2014 INFINITI QX60
- 2014 INFINITI QX60 HYBRID
- 2014 INFINITI QX70
- 2014 INFINITI QX80

## Recalls for the same vehicles and component

- [09V393000](/recalls/nhtsa/09V393000.md), 2009-10-05: TIRES:PRESSURE MONITORING AND REGULATING SYSTEMS

## Other bulletins for the same vehicles and component

- [ITB14012](/bulletins/10192331.md), 2021-05-10, Service bulletin: TIRES:PRESSURE MONITORING AND REGULATING SYSTEMS; ELECTRICAL SYSTEM:BODY CONTROL MODULE/BCM. SERVICE INFORMATION When a BCM is replaced for any reason, TPMS \(Tire Pressure Monitor System\) configuration must be performed. TPMS configuration is in addition to any other BCM configurations that may be performed. If TPMS configuration is not performed, TPMS transmitter ID registration will not complete. Follow the Service Procedure in this bulletin to perform TPMS configuration. See this bulletin for further detail.
- [ITB13034A](/bulletins/10192268.md), 2021-05-10, Service bulletin: TIRES; TIRES:PRESSURE MONITORING AND REGULATING SYSTEMS; EQUIPMENT. SERVICE INFORMATION As of the publication date of this bulletin, the 2014 Q50 and Q50 Hybrid require the use of CONSULT\-III plus to perform the TPMS \(Tire Pressure Monitoring System\) ID registration procedure. TPMS ID registration can be performed using one of the following procedures: \- Transmitter Activation tool \(J\-45295\-A\) with CONSULT\-III plus \(preferred method\) \- Signal Tech II \(J\-50190\) with CONSULT\-III plus NOTE: As of the publication date of this bulletin, Signal Tech II cannot be used on its own \(without CONSULT\-III plus\) to perform TPMS registration. Software updates for Signal Tech II will be available at a later date. Use the TPMS ID registration instructions in this bulletin as needed. NOTE: Tire Pressure Sensor Activation Tool J\-45295 will not work on the 2014 Q50 or Q50 Hybrid. See this bulletin for further detail.
- [ITB20\-003](/bulletins/10172177.md), 2020-03-06, Service bulletin: WHEELS; TIRES:VALVE; TIRES:PRESSURE MONITORING AND REGULATING SYSTEMS. 2014\-2020 Q50 AND 2017\-2020 Q60; TPMS SENSOR LEAKING AIR IF YOU CONFIRM The vehicle has the original equipment wheels and TPMS sensors \(tire pressure sensors\) installed. AND The owner states that one or more tires has a continuous air leak or looses air pressure multiple times over a 30 day period \(approximatively 1 psi every 3 days\). NOTE: The TPMS warning lamp may be ON \(not flashing\) with one or more of the following DTCs stored: • \- C1704, C1705, C1706, C1707, C1730, C1731, C1732, C1733 • \- If the TPMS warning lamp is flashing for more than one \(1\) minute this bulletin does not apply. Refer to the Electronic Service Manual \(ESM\) for further diagnostic information. ACTION 1. Confirm that air is leaking between the tire pressure sensor’s valve stem and valve nut of the affected wheel/tire. 2. Replace the valve stem washer/seal and the valve nut and then torque to the new specification.
- [ITB\-13\-034\-A](/bulletins/10053983.md), 2013-12-10, Service bulletin: TIRES:PRESSURE MONITORING AND REGULATING SYSTEMS. INFINITI: INFORMATION PROVIDED REGARDING SIGNAL TECH II, BEING USED, TO PERFORM TIRE PRESSURE MONITORING SYSTEM \(TPMS\) ID PROCEDURE REGISTRATION. MODEL 2014 Q50. \*PE
- [ITB\-12\-008](/bulletins/10043624.md), 2012-04-16, Service bulletin: TIRES:PRESSURE MONITORING AND REGULATING SYSTEMS. INFINITI: TIRE PRESSURE MONITORING SYSTEM \(TPMS\) SENSOR\(S\) DETECTS AIR SLOWLY LEAKING AND WARNING LIGHT IS ON FOR LOW TIRE PRESSURE. \*PE
- [ITB\-09\-050](/bulletins/10031304.md), 2010-01-05, Service bulletin: TIRES:PRESSURE MONITORING AND REGULATING SYSTEMS. INFINITI: TIRE PRESSURE MONITORING SYSTEM \(TPMS\) WARNING LIGHT ON/BLINKING. NO MODELS OR MODEL YEARS LISTED. \*PE UPDATED ON 08\-11\-2011. \*KB

JSON: [/v1/bulletins/10054302](/v1/bulletins/10054302)

[Report an error on this page](https://github.com/wenmar-pro/wenmar-open/issues/new?template=data_correction.yml&title=Data%20correction%3A%20Service%20bulletin%20ITB-13-039&page=https%3A%2F%2Fopen.wenmarpro.com%2Fbulletins%2F10054302&vehicle=Service%20bulletin%20ITB-13-039)