WenmarOpen by Wenmar Pro

Service bulletin ITB-13-039

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

The communication, as NHTSA indexes it (as of 2026-10-19)
TypeService bulletin
NHTSA id10054302
Published by NHTSA2014-01-09
Manufacturer's numberITB-13-039
Manufacturer's date2013-09-26
NHTSA componentTIRES:PRESSURE MONITORING AND REGULATING SYSTEMS

NHTSA's summary

INFINITI: SERVICE BULLETIN CONCERNING LOW TIRE PRESSURE WARNING SYSTEM INFORMATION. *JS

The document

No address for NHTSA's copy can be built for this communication. Ask the dealer for it by the manufacturer's number.

Components

Tires, Tire pressure monitoring

Vehicles listed
INFINITI EX352010, 2011
INFINITI FX352010
INFINITI FX352011
INFINITI FX352012
INFINITI FX352013
INFINITI FX502010, 2011, 2012, 2013
INFINITI G252011, 2012
INFINITI G372010, 2011, 2012
INFINITI JX2013
INFINITI JX352013
INFINITI M352010
INFINITI M35 HYBRID2012, 2013 (the catalog's model; the bulletin names a series or trim of it)
INFINITI M372011, 2012, 2013
INFINITI M37 HYBRID2011, 2012, 2013 (the catalog's model; the bulletin names a series or trim of it)
INFINITI M452010
INFINITI M562011, 2012, 2013
INFINITI M56 HYBRID2011, 2012, 2013 (the catalog's model; the bulletin names a series or trim of it)
INFINITI Q502014
INFINITI Q50 HYBRID2014 (the catalog's model; the bulletin names a series or trim of it)
INFINITI QX2011 to 2012
INFINITI QX562010, 2011, 2012, 2013
INFINITI QX602014
INFINITI QX60 HYBRID2014 (the catalog's model; the bulletin names a series or trim of it)
INFINITI QX702014
INFINITI QX802014

Listing a model year does not mean every vehicle of it is concerned: the document says which.

Recalls for the same vehicles and component
09V3930002009-10-05. TIRES:PRESSURE MONITORING AND REGULATING SYSTEMS

A recall listed here may apply to some of the same vehicles. Only the manufacturer can say whether it applies to one vehicle.

Other bulletins for the same vehicles and component
ITB140122021-05-10. Service bulletin. SERVICE INFORMATION When a BCM is replaced for any reason, TPMS (Tire Pressure Monitor System) configuration must be performed. TPMS configuration is in addition to any other BCM configurations that may be performed. If TPMS configuration is not performed, TPMS transmitter ID registration will not complete. Follow the Service Procedure in this bulletin to perform TPMS configuration. See this bulletin for further detail.
ITB13034A2021-05-10. Service bulletin. SERVICE INFORMATION As of the publication date of this bulletin, the 2014 Q50 and Q50 Hybrid require the use of CONSULT-III plus to perform the TPMS (Tire Pressure Monitoring System) ID registration procedure. TPMS ID registration can be performed using one of the following procedures: - Transmitter Activation tool (J-45295-A) with CONSULT-III plus (preferred method) - Signal Tech II (J-50190) with CONSULT-III plus NOTE: As of the publication date of this bulletin, Signal Tech II cannot be used on its own (without CONSULT-III plus) to perform TPMS registration. Software updates for Signal Tech II will be available at a later date. Use the TPMS ID registration instructions in this bulletin as needed. NOTE: Tire Pressure Sensor Activation Tool J-45295 will not work on the 2014 Q50 or Q50 Hybrid. See this bulletin for further detail.
ITB20-0032020-03-06. Service bulletin. 2014-2020 Q50 AND 2017-2020 Q60; TPMS SENSOR LEAKING AIR IF YOU CONFIRM The vehicle has the original equipment wheels and TPMS sensors (tire pressure sensors) installed. AND The owner states that one or more tires has a continuous air leak or looses air pressure multiple times over a 30 day period (approximatively 1 psi every 3 days). NOTE: The TPMS warning lamp may be ON (not flashing) with one or more of the following DTCs stored: • - C1704, C1705, C1706, C1707, C1730, C1731, C1732, C1733 • - If the TPMS warning lamp is flashing for more than one (1) minute this bulletin does not apply. Refer to the Electronic Service Manual (ESM) for further diagnostic information. ACTION 1. Confirm that air is leaking between the tire pressure sensor’s valve stem and valve nut of the affected wheel/tire. 2. Replace the valve stem washer/seal and the valve nut and then torque to the new specification.
ITB-13-034-A2013-12-10. Service bulletin. INFINITI: INFORMATION PROVIDED REGARDING SIGNAL TECH II, BEING USED, TO PERFORM TIRE PRESSURE MONITORING SYSTEM (TPMS) ID PROCEDURE REGISTRATION. MODEL 2014 Q50. *PE
ITB-12-0082012-04-16. Service bulletin. INFINITI: TIRE PRESSURE MONITORING SYSTEM (TPMS) SENSOR(S) DETECTS AIR SLOWLY LEAKING AND WARNING LIGHT IS ON FOR LOW TIRE PRESSURE. *PE
ITB-09-0502010-01-05. Service bulletin. INFINITI: TIRE PRESSURE MONITORING SYSTEM (TPMS) WARNING LIGHT ON/BLINKING. NO MODELS OR MODEL YEARS LISTED. *PE UPDATED ON 08-11-2011. *KB