# Service bulletin SIB\-34\-06\-12

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

- Type: Service bulletin
- NHTSA id: 10052365
- Published by NHTSA: 2013\-07\-18
- Manufacturer's number: SIB\-34\-06\-12
- Manufacturer's date: 2013\-05\-01
- NHTSA component: SERVICE BRAKES, AIR:ANTILOCK:ABS WARNING LIGHT; EXTERIOR LIGHTING:BRAKE LIGHTS; SERVICE BRAKES, AIR:DISC

## NHTSA's summary

BMW: WARNING LAMPS ARE ILLUMINATED FOR THE DSC, ABS AND BRAKE AND A POSSIBLE WARNING IN CONTROL DISPLAY FOR CHASSIS CONTROL SYSTEM FAILURE. MODELS 2012 F25, 30, 01, 02, 07, 10, 12, 13, E70, 71, 84. \*PE

## The document

No address for NHTSA's copy can be built for this communication. Ask the dealer for it by the manufacturer's number.

## Components

Brakes, Lighting, Anti\-lock brakes, Brake lights

## Vehicles listed

- 2008 to 2010 BMW 3 SERIES
- 2008 to 2010 BMW 3 SERIES
- 2008 BMW 3 SERIES
- 2008 BMW 3 SERIES
- 2009 to 2010 BMW 3 SERIES
- 2012 BMW 3 SERIES
- 2012 BMW 3 SERIES
- 2012 BMW 3 SERIES
- 2008 to 2012 BMW 5 SERIES
- 2009 BMW 5\-SERIES
- 2008 to 2012 BMW 6 SERIES
- 2008 to 2012 BMW 7\-SERIES
- 2013 BMW X1 SAV
- 2008 to 2012 BMW X5 SAV
- 2008 to 2011 BMW X6 SAV

## Other bulletins for the same vehicles and component

- [630215](/bulletins/10147622.md), 2018-11-13, Service bulletin: EXTERIOR LIGHTING:BRAKE LIGHTS; PARKING BRAKE:INDICATOR LIGHT. "SUBJECT Check Control Message: Parking Light Failed. z A CCM \(Check Control Message\) displays ""Parking Light failed."" z All lights are functioning correctly. Software error in the TMS \(Driver Module for Headlight\)"
- [B340616](/bulletins/10147015.md), 2018-11-05, Service bulletin: SERVICE BRAKES, AIR:ANTILOCK:WHEEL SPEED SENSOR; SERVICE BRAKES, HYDRAULIC:ANTILOCK/TRACTION CONTROL/ELECTRONIC LIMITED SLIP:WHEEL SPEED SENSOR/TONE RING. "DSC ""WHEEL SPEED SENSOR"" FAULT CODES AND MALFUNCTION INDICATOR LAMP\- DIAGNOSTIC. 1. DSC's fault codes stored from two different wheel speed sensors \(both front or both rear\): 4809B0 \- wheel speed sensor \- front left \- drive off recognition faulty and 4809CD \- wheel speed sensor \- front right \- drive off recognition faultyor 4809B9 \- wheel speed sensor \- rear left \- drive off recognition faulty and 480686 \- wheel speed sensor \- rear right \- drive off recognition faulty. 2. Next ignition ON \(after above codes stored\). a\) DME fault can occur:1F054D \- drive, safety function: Drive power output reduced, DSC signals implausible and b\) Malfunction Indicator Lamp \(MIL\) may light up. Faulty drive off recognition due to: a towing operation with a raised axle operation of the vehicle on the vehicle hoist operation of the vehicle on the roller test stand DSC diagnosis recognizes implausible wheel speeds, so no control is possible. DME fault is entered on safety grounds since the DSC fault still exists after a terminal change and may only be removed while driving."

JSON: [/v1/bulletins/10052365](/v1/bulletins/10052365)

[Report an error on this page](https://github.com/wenmar-pro/wenmar-open/issues/new?template=data_correction.yml&title=Data%20correction%3A%20Service%20bulletin%20SIB-34-06-12&page=https%3A%2F%2Fopen.wenmarpro.com%2Fbulletins%2F10052365&vehicle=Service%20bulletin%20SIB-34-06-12)