# Service bulletin NTB13\-039

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

- Type: Service bulletin
- NHTSA id: 10051768
- Published by NHTSA: 2013\-04\-10
- Manufacturer's number: NTB13\-039
- Manufacturer's date: 2013\-04\-04
- NHTSA component: VEHICLE SPEED CONTROL:CRUISE CONTROL

## NHTSA's summary

NISSAN: CRUISE CONTROL WILL NOT SET AND DTC P0605 IS STORED. \*JS

## The document

No address for NHTSA's copy can be built for this communication. Ask the dealer for it by the manufacturer's number.

## Components

Throttle and cruise control

## Trouble codes named

P0605

## Vehicles listed

- 2009 NISSAN 350Z
- 2009 to 2012 NISSAN 370Z
- 2009 to 2013 NISSAN ALTIMA
- 2009 to 2011 NISSAN ALTIMA HYBRID
- 2009 to 2013 NISSAN ARMADA
- 2009 to 2013 NISSAN CUBE
- 2009 NISSAN EQUATOR
- 2009 to 2013 NISSAN FRONTIER
- 2009 to 2011 NISSAN GT\-R
- 2013 NISSAN GT\-R
- 2011 to 2013 NISSAN JUKE
- 2010 NISSAN LEAF
- 2011 to 2013 NISSAN LEAF
- 2009 to 2012 NISSAN MAXIMA
- 2009 to 2012 NISSAN MURANO
- 2012 to 2013 NISSAN NV
- 2012 NISSAN NV1500
- 2012 NISSAN NV2500
- 2012 NISSAN NV3500
- 2009 to 2013 NISSAN PATHFINDER
- 2009 NISSAN QUEST
- 2010 NISSAN QUEST
- 2011 to 2012 NISSAN QUEST
- 2009 to 2013 NISSAN ROGUE
- 2009 to 2013 NISSAN SENTRA
- 2009 to 2013 NISSAN TITAN
- 2009 to 2013 NISSAN VERSA
- 2009 to 2013 NISSAN XTERRA
- 2013 NISSAN redundant NV200

## Recalls for the same vehicles and component

- [15V507000](/recalls/nhtsa/15V507000.md), 2015-08-12: VEHICLE SPEED CONTROL:ACCELERATOR PEDAL; SERVICE BRAKES, HYDRAULIC:PEDALS AND LINKAGES

## Other bulletins for the same vehicles and component

- [NTB14114A](/bulletins/10192663.md), 2021-05-10, Service bulletin: PARKING BRAKE; SEAT BELTS; VEHICLE SPEED CONTROL. IF YOU CONFIRM All "hands free" functions of the Intelligent Key \(I\-Key\) do not work. For example, the doors will not lock or unlock when pressing either front door request switch. NOTE: \- The issue of all I\-Key "hands free" functions not working may occur intermittently or all the time. \- The message "No Key Detected" or similar may show on the Vehicle Information Display \(located in the combination meter\). \- All I\-Key remote button functions \(door lock/unlock, etc.\) WILL work normally when all I\-Key "hands free" functions are NOT working. ACTION 1. Inspect the I\-Key?s battery on its negative contact side. 2. If excessive scratching is found, replace the battery. 3. Verify all I\-Key functions \(both "hands free" and remote\) work properly after battery replacement. NOTE: Do NOT replace the BCM, I\-Key, or other parts for the issue described under IF YOU CONFIRM, if it should occur. See this bulletin for further detail.
- [NTB14089B](/bulletins/10192563.md), 2021-05-10, Service bulletin: SEAT BELTS; ELECTRICAL SYSTEM; EQUIPMENT; VEHICLE SPEED CONTROL. IF YOU CONFIRM The I\-Key door handle request switch intermittently will not lock or unlock the doors. and The vehicle has painted door handles. and Key fob has been function tested and signal strength is correct. ACTION Replace the door handles with the new door handles listed in Table A on page 2. \- Refer to the Electronic Service Manual \(ESM\), section DLK Door \& Lock, for information about door handle replacement. NOTE \- This bulletin does not apply to vehicles with chrome door handles. See this bulletin for further detail.
- [NTB15036](/bulletins/10192562.md), 2021-05-10, Service bulletin: AIR BAGS; VEHICLE SPEED CONTROL; ELECTRICAL SYSTEM; SEAT BELTS; EQUIPMENT. SERVICE INFORMATION The applied vehicles are equipped with automatic door locks that lock all doors when the vehicle speed reaches 15 MPH. There is no instruction in the Owner?s Manual on auto\-lock function deactivation. All doors unlock automatically when the ignition is placed in the OFF position \(models with Intelligent Key system\) or when the key is removed from the ignition switch \(models without Intelligent Key system\). The auto\-unlock function can be deactivated by the driver in accordance with Owner?s Manual Instructions. Please see this bulletin for further details.
- [NTB15005](/bulletins/10192518.md), 2021-05-10, Service bulletin: VEHICLE SPEED CONTROL; AIR BAGS; SEATS. INTRODUCTION Nissan is conducting a Voluntary Safety Recall Campaign on certain specific Model Year 2013 \- 2014 Nissan Pathfinders to adjust the lever stop for the secondary hood latch lever at no charge for parts or labor. IDENTIFICATION NUMBER Nissan has assigned identification number PC343 to this campaign. This number must appear on all communications and documentation of any nature dealing with this campaign. RETAILER RESPONSIBILITY It is the retailer?s responsibility to check Service COMM for the campaign status on each vehicle falling within the range of this voluntary safety recall which for any reason enters the service department. This includes vehicles purchased from private parties or presented by transient \(tourist\) owners and vehicles in a retailer?s inventory. Federal law requires that new vehicles in retailer inventory which are the subject of a safety recall must be corrected prior to sale. Failure to do so can result in civil penalties by the National Highway Traffic Safety Administration. While federal law applies only to new vehicles, Nissan strongly encourages retailers to correct any used vehicles in their inventory before they are retailed. Please see this bulletin for further details.
- [NTB13068](/bulletins/10192244.md), 2021-05-10, Service bulletin: VEHICLE SPEED CONTROL; VISIBILITY; AIR BAGS. IF YOU CONFIRM The "Comfort" option under the Non\-Navigation system's user configurable settings menu is missing from the scroll down menu, which includes: Auto Interior Illumination, Light Sensitivity, Light Off Delay, Speed Sensing Wiper Interval, Selective Door Unlock, and Return all Settings to Default ACTION 1. Follow the SERVICE PROCEDURE to load the Reprogramming Software DVD referenced in PARTS INFORMATION. 2. Read configuration, initialize, and then manually configure the MULTI AV system with the setting in this bulletin. See this bulletin for further detail.
- [NTB13074](/bulletins/10192223.md), 2021-05-10, Service bulletin: AIR BAGS; VEHICLE SPEED CONTROL; EQUIPMENT. SERVICE INFORMATION: If the BCM in an Applied Vehicle is replaced for any reason and not configured correctly, the following issue may occur \- When the driver door is opened, the convertible top opens. When replacing a BCM, make sure to \- Follow information in the appropriate Service Manual \- Use CONSULT\-III plus to perform configuration \- Select the correct vehicle in CONSULT\-III plus \- Confirm the VIN is correct \(matches the vehicle\) in CONSULT\-III plus \- Select/install the correct configuration
- [NTB13067](/bulletins/10192205.md), 2021-05-10, Service bulletin: VISIBILITY; AIR BAGS; SEAT BELTS; VEHICLE SPEED CONTROL. IF YOU CONFIRM The "Comfort" option \(comfort \& convenience settings\) under the Navigation's user configurable settings is missing from the scroll down menu, which includes: \> Auto Interior Illumination \> Light Sensitivity \> Light Off Delay \> Speed Sensing Wiper Interval \> Selective Door Unlock \> Intelligent Key Lock/Unlock \> Slide Driver's Seat Back on Exit \> Return all Settings to Default 1. Follow the Service Procedure starting on page 2 to load the Re\-programming Software DVD referenced in the Parts Information on the next page. 2. Initialize and then manually configure the MULTI AV system with the setting in this bulletin. See this bulletin for further details.
- [NTB13049](/bulletins/10192170.md), 2021-05-10, Service bulletin: VISIBILITY; VEHICLE SPEED CONTROL; EQUIPMENT; AIR BAGS. SERVICE INFORMATION If the door mirror corner finisher of either front door has to be removed or replaced for any reason, make sure to remove it as noted in the picture \(see bulletin\). NOTE: The front door finisher must be removed prior to door mirror corner finisher removal. Refer to the L DRIVER CONTROLS\>MIR Mirrors section of the Electronic Service Manual \(ESM\). See this bulletin for further detail.
- [NTB13048](/bulletins/10192169.md), 2021-05-10, Service bulletin: STRUCTURE; VEHICLE SPEED CONTROL. IF YOU CONFIRM: The front lower corner of either front door, when opened or closed, rubs the center mud guard AND There is no body damage causing this issue. ACTION: Replace the center mud guard\(s\) with the one\(s\) listed in PARTS INFORMATION. \- Replace only the center mud guard with the condition stated above. \- DO NOT attempt to adjust the front door or any other body parts for this issue, if it should occur. \- This bulletin does not apply if the center mud guard is the new style part. See this bulletin for further detail.
- [NTB13010B](/bulletins/10192167.md), 2021-05-10, Service bulletin: VEHICLE SPEED CONTROL. IF YOU CONFIRM: \* The leading edge of the Rear Spoiler contacts the trailing edge of the roof when the back door is opened or closed. \* Scuff marks are present on the trailing edge of the roof. ACTION: \* Remove the Rear Spoiler and add three foam spacers to the underside of the spoiler leading edge to provide additional clearance to the trailing edge of the roof when the back door is opened. \> Refer to the SERVICE PROCEDURE to remove the Rear spoiler and install foam spacers. Please see this bulletin for further details.

JSON: [/v1/bulletins/10051768](/v1/bulletins/10051768)

[Report an error on this page](https://github.com/wenmar-pro/wenmar-open/issues/new?template=data_correction.yml&title=Data%20correction%3A%20Service%20bulletin%20NTB13-039&page=https%3A%2F%2Fopen.wenmarpro.com%2Fbulletins%2F10051768&vehicle=Service%20bulletin%20NTB13-039)