# Service bulletin ITB\-13\-13

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

- Type: Service bulletin
- NHTSA id: 10051766
- Published by NHTSA: 2013\-04\-10
- Manufacturer's number: ITB\-13\-13
- Manufacturer's date: 2013\-04\-04
- NHTSA component: VEHICLE SPEED CONTROL:CRUISE CONTROL

## NHTSA's summary

INFINTI: CRUISE CONTROL WILL NOT SET AND DTC P0605 IS STORED. IF A MALFUNCTION IN THE ASCD SYSTEM IS DETECTED, THE CRUISE INDICATOR MAY STAY ON AND THE SET INDICATOR MAY FLASH. \*JS

## The document

No address for NHTSA's copy can be built for this communication. Ask the dealer for it by the manufacturer's number.

## Components

Throttle and cruise control

## Trouble codes named

P0605

## Vehicles listed

- 2009 to 2011 INFINITI EX35
- 2009 to 2010 INFINITI FX35
- 2011 INFINITI FX35
- 2012 INFINITI FX35
- 2009 to 2012 INFINITI FX50
- 2011 INFINITI G25
- 2009 INFINITI G35
- 2009 to 2012 INFINITI G37
- 2009 INFINITI J30
- 2013 INFINITI JX35
- 2009 to 2010 INFINITI M35
- 2012 INFINITI M35 HYBRID
- 2011 to 2013 INFINITI M37
- 2011 to 2013 INFINITI M37 HYBRID
- 2009 to 2010 INFINITI M45
- 2011 to 2013 INFINITI M56
- 2011 to 2013 INFINITI M56 HYBRID
- 2011 to 2012 INFINITI QX
- 2009 INFINITI QX4
- 2009 to 2013 INFINITI QX56

## Recalls for the same vehicles and component

- [13V430000](/recalls/nhtsa/13V430000.md), 2013-09-26: VEHICLE SPEED CONTROL:ACCELERATOR PEDAL

## Other bulletins for the same vehicles and component

- [ITB10\-007B](/bulletins/10195471.md), 2021-06-09, Service bulletin: VEHICLE SPEED CONTROL. VOLUNTARY SERVICE CAMPAIGN 2010 EX35; INTELLIGENT CRUISE CONTROL Service Campaign ID \# P0301 is no longer active. • Repair orders opened after this bulletin’s published date are no longer eligible for reimbursement under Campaign ID \# P0301. • Discard all previous versions of ITB10\-007.
- [ITB10\-003A](/bulletins/10195470.md), 2021-06-09, Service bulletin: VEHICLE SPEED CONTROL. VOLUNTARY SERVICE CAMPAIGN 2010 QX56; INTELLIGENT CRUISE CONTROL \(ICC\) SENSOR Service Campaign ID \# PC028 is no longer active. • Repair orders opened after this bulletin’s published date are no longer eligible for reimbursement under Campaign ID \# PC028. • Discard all previous versions of ITB10\-003.
- [ITB13027](/bulletins/10192220.md), 2021-05-10, Service bulletin: AIR BAGS; VEHICLE SPEED CONTROL; EQUIPMENT. SERVICE INFORMATION: If the BCM in an Applied Vehicle is replaced for any reason and not configured correctly, the following issue may occur \- When the driver door is opened, the convertible top opens. When replacing a BCM, make sure to \- Follow information in the appropriate Service Manual \- Use CONSULT\-III plus to perform configuration \- Select the correct vehicle in CONSULT\-III plus \- Confirm the VIN is correct \(matches the vehicle\) in CONSULT\-III plus \- Select/install the correct configuration
- [ITB13012](/bulletins/10192157.md), 2021-05-10, Service bulletin: VEHICLE SPEED CONTROL; SEAT BELTS. SERVICE INFORMATION The "Lock / Unlock request buttons" that are located on the outside door handles of vehicles with Intelligent Key can be disabled \(or enabled\) through either the "Comfort \& Conv." settings of the Audio/Visual/Navigation system, orthrough the "Combination Meter settings" depending on the vehicle model, year and trim level. NOTE: In some instances this feature may be unintentionally disabled. Please verify the status of this feature before any further diagnostic is performed. Please see this bulletin for further details.
- [ITB12016B](/bulletins/10192132.md), 2021-05-10, Service bulletin: VISIBILITY; STEERING; VEHICLE SPEED CONTROL; POWER TRAIN; WHEELS. IF YOU CONFIRM: The following incidents with The Auto Drive Position System: \* Door mirrors do not go back to the original preset memory position after the vehicle is shifted into reverse, and then shifted back into drive. \* Return position of mirrors drifts farther and farther from original memory preset as mirror is cycled from the drive to reverse positions \(cumulative\). \* With vehicle in park and engine turned off, the Seat and Steering Wheel do not move when exiting vehicle. ACTION: Replace Left Power Seat Control Unit with new part listed in PARTS INFORMATION in this bulletin. See this bulletin for further details.
- [ITB12071](/bulletins/10192058.md), 2021-05-10, Service bulletin: VISIBILITY; VEHICLE SPEED CONTROL. SERVICE INFORMATION Part of the procedure to remove the glass mirror in either door mirror of an applied vehicle has been changed. Until the related Electronic Service Manuals \(ESM\) are amended, use the information in this bulletin. \- Other than noted, all other procedural steps in the ESM remain the same. See this bulletin for further detail.
- [ITB12070](/bulletins/10192056.md), 2021-05-10, Service bulletin: VISIBILITY; VEHICLE SPEED CONTROL; ENGINE AND ENGINE COOLING; BACK OVER PREVENTION. SERVICE INFORMATION The "Reverse Tilt\-Down" feature will move the glass on the outside mirrors downward when the gear selector is placed in the Reverse \(R\) position. As the mirror glass moves downward, it may reach the end of its travel. If the mirror glass reaches the end of its travel it will make a clicking noise. The clicking noise may occur once or multiple times. IMPORTANT: \- The clicking noise described above is a normal function of the mirror glass movement. \- Do not replace the door mirror assembly in an attempt to repair this normal function.
- [ITB17\-020](/bulletins/10109194.md), 2017-08-01, Service bulletin: ENGINE; VEHICLE SPEED CONTROL. 2010 \- 2012 FX35; MIL ON WITH DTC P0101 This bulletin applies only to vehicles equipped with V6 engine. IF YOU CONFIRM The MIL is ON with DTC P0101 \(MAF SEN/CIRCUIT\-B1\) stored. and There are no drivability issues. ACTION Clean the throttle valve and chamber of the electronic throttle control actuator.
- [ITB\-14\-051](/bulletins/10056785.md), 2015-02-20, Service bulletin: VEHICLE SPEED CONTROL; VEHICLE SPEED CONTROL:CRUISE CONTROL. INFINITI: ON SOME VEHICLES, THE FORWARD COLLISION WARNING \(FCW\) MALFUNCTION HAS BEEN OR IS ON AND FLUID LEVEL FOR BRAKES IS NORMAL AND THE ABS CONTROL UNIT NEEDS PROGRAMMING, PER SERVICE PROCEDURE. MODEL 2013\-14 JX35, QX60, 2014\-15 Q50. \*PE UPDATED 9/10/15. \*PE
- [ITB\-12\-013](/bulletins/10043704.md), 2012-04-23, Service bulletin: VEHICLE SPEED CONTROL:CRUISE CONTROL. INFINITI: PERFORMING MILLIMETER WAVE \(RADAR\) SENSOR ADJUSTMENT SERVICE WILL REQUIRE A SPECIAL SERVICE TOOL KIT. \*PE

JSON: [/v1/bulletins/10051766](/v1/bulletins/10051766)

[Report an error on this page](https://github.com/wenmar-pro/wenmar-open/issues/new?template=data_correction.yml&title=Data%20correction%3A%20Service%20bulletin%20ITB-13-13&page=https%3A%2F%2Fopen.wenmarpro.com%2Fbulletins%2F10051766&vehicle=Service%20bulletin%20ITB-13-13)