# Service bulletin TT\-45\-06\-54

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

- Type: Service bulletin
- NHTSA id: 10051242
- Published by NHTSA: 2013\-02\-26
- Manufacturer's number: TT\-45\-06\-54
- Manufacturer's date: 2012\-11\-16
- NHTSA component: SERVICE BRAKES, AIR:ANTILOCK:CONTROL UNIT/MODULE

## NHTSA's summary

VOLKSWAGEN: UPDATE TO INFORMATION. PROVIDING CORRECT CODING VALUES FOR ABS CONTROL MODULES ON CERTAIN VEHICLES WITHOUT CAN\-BUS. MODELS 1998\-2002 PASSAT. \*PE

## The document

No address for NHTSA's copy can be built for this communication. Ask the dealer for it by the manufacturer's number.

## Components

Brakes, Anti\-lock brakes

## Vehicles listed

- 1998 to 2002 VOLKSWAGEN PASSAT

## Other bulletins for the same vehicles and component

- [TT451301](/bulletins/10238966.md), 2023-07-10, Service bulletin: WHEELS; SERVICE BRAKES, AIR:ANTILOCK:CONTROL UNIT/MODULE; BACK OVER PREVENTION; ELECTRICAL SYSTEM; STEERING; STEERING:STEERING WHEEL /HANDLE BAR:YAW/ANGLE SENSOR. After replacing a Bosch 5.7 ABS module, refer to the table below to determine correct module coding value based on vehicle PR codes. Listed login code must be entered under Access/authorization before coding is attempted. After completing coding, G85 steering angle sensor basic settings must be performed before cycling key. To perform G85 basic settings manually in Vehicle self\-diagnosis \(VAS PC\) or Control Module OBD \(ODIS\), start by entering access/authorization code 40168. After code is accepted, turn steering wheel 1 turn left and back to center, one turn right, and then center steering wheel. Select basic settings and enter group 1. Once display changes to ?Sensor OK? or ?Calibration OK?, basic settings have been completed. Cycle key OFF and then back ON. Clear faults to verify repair.
- [TT450802](/bulletins/10238963.md), 2023-07-10, Service bulletin: SERVICE BRAKES, HYDRAULIC:ANTILOCK/TRACTION CONTROL/ELECTRONIC LIMITED SLIP:WHEEL SPEED SENSOR/TONE RING; UNKNOWN OR OTHER. Fault code 02543 000 ?Brake Vacuum Sensor no Display? may be encountered in the ABS module. This may be caused by the hydraulic brake boost function \(HBV\) in adaptation value 61 being turned off \(value = 0\). All Passat Wagons \(including 4motion\) and 3.6L equipped sedans with front drive should have this function turned on \(value = 1\). Change the adaptation value and verify the fault has cleared. Additionally, it may be necessary to lock the vehicle and allow the modules to go to sleep to clear the fault.
- [TT450654](/bulletins/10238620.md), 2023-07-05, Service bulletin: SERVICE BRAKES, HYDRAULIC; SERVICE BRAKES, HYDRAULIC:ANTILOCK/TRACTION CONTROL/ELECTRONIC LIMITED SLIP:ABS WARNING LIGHT. To code a Bosch 5.3 ABS control module, use Vehicle Self\-diagnosis to enter the correct coding value from the tables below. Note that the first table is only applicable to 2.8L V6 equipped vehicles WITHOUT a CAN\-Bus. All 1.8L Turbo vehicles and those 2.8L V6 vehicles that are equipped with a CAN\-Bus should use the second table.
- [TT 45\-06\-54](/bulletins/10157760.md), 2019-04-08, Service bulletin: SERVICE BRAKES, HYDRAULIC:ANTILOCK/TRACTION CONTROL/ELECTRONIC LIMITED SLIP:CONTROL UNIT/MODULE. Tech Tips \(Bosch 5.3 ABS Control Module ? ABS Coding Tables\): This document informs To code a Bosch 5.3 ABS control module, use Vehicle Self\-diagnosis to enter the correct coding value from the tables in this document.
- [TT 45\-06\-54](/bulletins/10156161.md), 2019-04-01, Service bulletin: ELECTRICAL SYSTEM; SERVICE BRAKES, AIR:ANTILOCK. Tech Tips \(Bosch 5.3 ABS Control Module ? ABS Coding Tables\): This document informs To code a Bosch 5.3 ABS control module, use Vehicle Self\-diagnosis to enter the correct coding value from the tables in this document.
- [0517](/bulletins/10016037.md), 2005-08-19, Service bulletin: SERVICE BRAKES, HYDRAULIC:ANTILOCK/TRACTION CONTROL/ELECTRONIC LIMITED SLIP:CONTROL UNIT/MODULE. ANTI\-LOCK BRAKE SYSTEM \(ABS\) CONTROL MODULE WARRANTY REPAIR PROCESS. \*TT
- [0206](/bulletins/10000560.md), 2003-03-25, Service bulletin: SERVICE BRAKES, HYDRAULIC:ANTILOCK/TRACTION CONTROL/ELECTRONIC LIMITED SLIP. DIAGNOSTIC TROUBLE CODES 00778 AND 01044 STORED IN BRAKE ELECTRONICS DIAGNOSTIC TROUBLE CODE MEMORY. \*TT

JSON: [/v1/bulletins/10051242](/v1/bulletins/10051242)

[Report an error on this page](https://github.com/wenmar-pro/wenmar-open/issues/new?template=data_correction.yml&title=Data%20correction%3A%20Service%20bulletin%20TT-45-06-54&page=https%3A%2F%2Fopen.wenmarpro.com%2Fbulletins%2F10051242&vehicle=Service%20bulletin%20TT-45-06-54)