# Service bulletin ITB\-12\-067

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

- Type: Service bulletin
- NHTSA id: 10047200
- Published by NHTSA: 2012\-11\-14
- Manufacturer's number: ITB\-12\-067
- Manufacturer's date: 2012\-10\-25
- NHTSA component: ENGINE

## NHTSA's summary

INFINITI: SEE DOCUMENT SEARCH BUTTON FOR OWNER LETTER. DUE TO POSSIBLE DAMAGE TO AIR FUEL \(A/F\) SENSORS, CAUSED BY ENGINE CONTROL MODULE \(ECM\) IMPROPER CALIBRATION, THE A/F SENSORS WILL BE REPLACED, IF NEEDED. MODEL 2013 JX35. \*PE

## The document

No address for NHTSA's copy can be built for this communication. Ask the dealer for it by the manufacturer's number.

## Components

Engine

## Vehicles listed

- 2013 INFINITI JX35

## Other bulletins for the same vehicles and component

- [ITB13\-044J](/bulletins/10208932.md), 2022-03-12, Service bulletin: FUEL SYSTEM, OTHER; ENGINE AND ENGINE COOLING. EVAP LEAK DTC P0442, P0455, P0456 INFORMATION This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
- [ITB15\-024a](/bulletins/10185375.md), 2021-01-09, Service bulletin: ELECTRICAL SYSTEM; ENGINE AND ENGINE COOLING:ENGINE:ENGINE CONTROL MODULE \(ECU/ECM\). 2005\-2015 INFINITI VEHICLES; ECM REPROGRAMMING SERVICE INFORMATION This bulletin is no longer active. Please discard previous versions of ITB15\-024.
- [ITB14\-011d](/bulletins/10164637.md), 2019-10-09, Service bulletin: ENGINE AND ENGINE COOLING. REMOTE ENGINE START NOT WORKING This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
- [ITB13\-044g](/bulletins/10152989.md), 2019-02-19, Service bulletin: ENGINE AND ENGINE COOLING. ALL MODEL YEAR 2012 AND NEWER INFINITI VEHICLES; EVAP LEAK DTC P0442, P0455, P0456 INFORMATION This bulletin has been amended. See Amendment History on the last page. Please discard previous versions of this bulletin.
- [Revision 1\-IEVAP](/bulletins/10152503.md), 2019-01-07, Service bulletin: ENGINE; EQUIPMENT. OBD II EVAP Tube Warranty Enhancement The update below was sent out to Regions and Retailers in August of this year. We are re\-circulating this update to make regional and retailer personnel aware that we are re\-notifying clients at this time.
- [Revision 1\-NEVAP](/bulletins/10145053.md), 2018-10-01, Service bulletin: ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:EMISSION CONTROL. OBD II EVAP Tube Warranty Enhancement UPDATE August 17, 2018 Please discard earlier versions of this bulletin. The announcement from March 21, 2017 has been revised to include: \- Clarification that the refueling concern is extremely hard to fill, not intermittent, and occurs at multiple fueling stations and fuel pumps \- Customer expense may be applicable if the vehicle is out of warranty
- [Revision 1\-IEVAP](/bulletins/10145052.md), 2018-10-01, Service bulletin: ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:EMISSION CONTROL. OBD II EVAP Tube Warranty Enhancement UPDATE August 17, 2018 Please discard earlier versions of this bulletin The announcement from March 21, 2017 has been revised to include: o Clarification that the refueling concern is extremely hard to fill, not intermittent, and occurs at multiple fueling stations and fuel pumps o Client expense may be applicable if the vehicle is out of warranty
- [ITB13\-052b](/bulletins/10136202.md), 2018-05-07, Service bulletin: EQUIPMENT ADAPTIVE/MOBILITY; ENGINE. INTELLIGENT KEY NOT DETECTED / ENGINE WILL NOT START This bulletin has been amended to update the Applied Vehicles. No other changes were made. Please discard previous versions of this bulletin.
- [ITB16\-047](/bulletins/10119264.md), 2017-10-15, Service bulletin: ENGINE. INFINITI; DIAGNOSIS INFORMATION FOR ABS DTC C1130 SERVICE INFORMATION When diagnosing for DTC C1130 \(ENGINE SIGNAL\): ECM related DTCs \(P\-codes\) must be diagnosed, repaired, and DTCs erased first. \- DTC C1130 is an ABS DTC that indicates an output signal of the ECM is not recognized. \- Absent or incorrect ECM signals, that are indicated by corresponding P\-codes, may trigger C1130 in the ABS control unit. \- Some vehicle features that can be affected by absent or incorrect ECM signals are: \- Forward Emergency Braking \(FEB\) \- Intelligent Cruise Control \(ICC\) \- VDC/ABS/TCS
- [ITB13\-052a](/bulletins/10119255.md), 2017-10-15, Service bulletin: ENGINE. INTELLIGENT KEY NOT DETECTED / ENGINE WILL NOT START This bulletin has been amended to update the Applied Vehicles and make changes to the body of the bulletin. Please discard previous versions.

JSON: [/v1/bulletins/10047200](/v1/bulletins/10047200)

[Report an error on this page](https://github.com/wenmar-pro/wenmar-open/issues/new?template=data_correction.yml&title=Data%20correction%3A%20Service%20bulletin%20ITB-12-067&page=https%3A%2F%2Fopen.wenmarpro.com%2Fbulletins%2F10047200&vehicle=Service%20bulletin%20ITB-12-067)