WenmarOpen by Wenmar Pro

Service bulletin PIC-5257A

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

The communication, as NHTSA indexes it (as of 2026-10-19)
TypeService bulletin
NHTSA id10036104
Published by NHTSA2011-03-11
Manufacturer's numberPIC-5257A
Manufacturer's date2010-08-01
NHTSA componentELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL; STEERING

NHTSA's summary

BUICK/CADILLAC/CHEVROLET/GMC: SERVICE STABILITY MESSAGE WITH CODE U07010. AFTER FURTHER INVESTIGATION YOU MAY NOTICE TROUBLE CODE 70710 SET BY THE STEERING ANGLE SENSOR. *PE

The document

No address for NHTSA's copy can be built for this communication. Ask the dealer for it by the manufacturer's number.

Components

Electrical system, Steering, Instrument cluster

Vehicles listed
BUICK LACROSSE2010, 2011
BUICK REGAL2011
CADILLAC SRX2010, 2011
CHEVROLET CAMARO2010, 2011
CHEVROLET EQUINOX2010, 2011
GMC TERRAIN2010, 2011

Listing a model year does not mean every vehicle of it is concerned: the document says which.

Other bulletins for the same vehicles and component
PIC5741B2023-12-11. Service bulletin. Multiple DTCs Set When Using Scan Tool Device.
PIC5741A2023-12-11. Service bulletin. Multiple DTCs Set When Using Scan Tool Device.
PIC5398C2023-12-11. Service bulletin. Mist From Instrument Panel Vents, Moisture On Windshield Or Water On Floor
PIC5398B2023-12-11. Service bulletin. Mist From Instrument Panel Vents, Moisture On Windshield Or Water On Floor.
130089004H2023-12-11. Service bulletin. Car and Truck Fix it Right the First Time Issues
07-08-49-020R2023-10-18. Service bulletin. This informational bulletin provides information for the IPC odometer programming method quick reference guide.
07-08-49-020J2021-04-20. Service bulletin. IPC Odometer Programming Method Quick Reference Guide Season Odometer Programming Methods in Use Today 1. IPC reprogramming and setup using the service programming system (SPS). 2. Odometer setup at the electronic service center (ESC) when using an exchange IPC/DIC. 3. Tech 2® – The Tech 2 is used to set up a replacement BCM, which includes loading the odometer value that is displayed and stored in the IPC. A replacement IPC will display the previously stored vehicle odometer value, communicated from the BCM, after cycling the ignition or driving the vehicle. *The odometer programming is integrated as part of the BCM programming procedure. It is not a stand-alone event.
070849020M2021-04-16. Service bulletin. IPC Odometer Programming Method Quick Reference Guide
060089029T2020-06-22. Service bulletin. This informational bulletin includes information on Interior Cleaning - Instrument Panel (IP), Hard or Plastic Surfaces, Seats, Carpet, Leather, Vinyl, Fabric Cleaner, Stain Remover, Restorer - Product Availability.
060089029S2020-06-22. Service bulletin. This informational bulletin includes information on Interior Cleaning - Instrument Panel (IP), Hard or Plastic Surfaces, Seats, Carpet, Leather, Vinyl, Fabric Cleaner, Stain Remover, Restorer - Product Availability.