# Service bulletin TSB\-69\-10\-10

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

- Type: Service bulletin
- NHTSA id: 10035271
- Published by NHTSA: 2011\-02\-15
- Manufacturer's number: TSB\-69\-10\-10
- Manufacturer's date: 2010\-09\-10
- NHTSA component: AIR BAGS:FRONTAL:SENSOR/CONTROL MODULE\-INACTIVE

## NHTSA's summary

REPLACED AIRBAG CONTROL UNIT CANNOT BE CODED. AFTER REPLACING THE AIRBAG CONTROL UNIT, THE CONTROL UNIT CANNOT BE CODED VIA SVM SPEC/ACTUAL. THE LATEST REVISION OF THE AIRBAG CONTROL UNIT MUST BE CODED AND PARAMETERIZED USING AN SVM CODE, WHICH IS LISTED ETKA IN THE REMARKS AREA FOR THE PART NUMBER. \*PE

## The document

No address for NHTSA's copy can be built for this communication. Ask the dealer for it by the manufacturer's number.

## Components

Air bags, Air bag control module

## Vehicles listed

- 2009 to 2010 AUDI A4
- 2011 AUDI A4 AVANT
- 2008 to 2011 AUDI A5
- 2009 to 2011 AUDI Q5

## Recalls for the same vehicles and component

- [16V376000](/recalls/nhtsa/16V376000.md), 2016-05-27: AIR BAGS:FRONTAL:SENSOR/CONTROL MODULE\-INACTIVE; AIR BAGS

## Other bulletins for the same vehicles and component

- [A691428 2023323\-](/bulletins/10122295.md), 2017-11-08, Service bulletin: AIR BAGS:FRONTAL:SENSOR/CONTROL MODULE\-INACTIVE; AIR BAGS. Supersedes Technical Service Bulletin Group 69 number 13\-26 dated October 21, 2013. After the airbag control module \(J234\) has been replaced, the control unit cannot be coded via SVM spec/actual. An SVM code is required to code and parameterize the new service replacement airbag control module. Each model's SVM code is provided in a parts bulletin \(GP bulletin\), which should have been referenced through ETKA when the module was replaced. The control module cannot be coded until the SVM code has been executed. If the SVM code was not acquired through the GP bulletin in ETKA, follow the instructions in the Service section of this bulletin to update the control module.
- [TSB\-69\-11\-20](/bulletins/10043389.md), 2012-03-26, Service bulletin: AIR BAGS:FRONTAL:SENSOR/CONTROL MODULE\-INACTIVE; AIR BAGS. AUDI: SOME MODEL YEAR VEHICLES MUST HAVE THE SERVICE PART FOR THE AIRBAG CONTROL UNIT CODED AND/OR PARAMETER USING SVM CODE LISTED IN ETKA. MODELS A4, S4, A5, S5, Q5, TT, TTS, A3, PA , C6, A6 PA, D4, A8,C7 A7. \*PE

JSON: [/v1/bulletins/10035271](/v1/bulletins/10035271)

[Report an error on this page](https://github.com/wenmar-pro/wenmar-open/issues/new?template=data_correction.yml&title=Data%20correction%3A%20Service%20bulletin%20TSB-69-10-10&page=https%3A%2F%2Fopen.wenmarpro.com%2Fbulletins%2F10035271&vehicle=Service%20bulletin%20TSB-69-10-10)