# Service bulletin SI\-B\-63\-06\-10

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

- Type: Service bulletin
- NHTSA id: 10034186
- Published by NHTSA: 2010\-10\-25
- Manufacturer's number: SI\-B\-63\-06\-10
- Manufacturer's date: 2010\-08\-01
- Replaces: SIB\-63\-06\-10\-UD
- NHTSA component: EXTERIOR LIGHTING:TAIL LIGHTS:SWITCH; EXTERIOR LIGHTING:TAIL LIGHTS

## NHTSA's summary

BMW: LEDS IN REAR LAMP INOPERATIVE. THE LEDS \(LIGHT EMITTING DIODES\) IN THE OUTER LEFT OR OUTER RIGHT REAR LAMP ARE INOPERATIVE. AFFECTED ARE THE LEDS FOR THE PARKING LAMP/TAIL LAMP OR THE TURN SIGNALS. NO CHECK CONTROL MESSAGE IS DISPLAYED. CORROSION OF AN INTERNAL CONNECTION WITH THE TAIL LAMP IS CAUSED. \*PE UPDATED 9/26/11. \*PE

## The document

No address for NHTSA's copy can be built for this communication. Ask the dealer for it by the manufacturer's number.

## Components

Lighting, Tail lights

## Vehicles listed

- 2008 to 2010 BMW 3 SERIES
- 2008 to 2010 BMW 3 SERIES
- 2008 BMW 3 SERIES
- 2008 BMW 3 SERIES
- 2009 to 2010 BMW 3 SERIES

## Other bulletins for the same vehicles and component

- [B63\-03\-12](/bulletins/10044032.md), 2012-05-08, Service bulletin: EXTERIOR LIGHTING:TAIL LIGHTS. BMW: THE LEFT OR RIGHT REAR LIGHT IN THE SIDE PANEL HAS CONDENSATION CONCERNING VEHICLES PRODUCED UP TO FEBRUARY 27,2012. \*JS
- [SIB\-63\-05\-10](/bulletins/10041280.md), 2011-09-27, Service bulletin: EXTERIOR LIGHTING:TAIL LIGHTS; PARKING BRAKE:INDICATOR LIGHT; EXTERIOR LIGHTING:TURN SIGNAL. BMW: THE REAR LED LIGHTS ARE INOPERATIVE. THERE IS CONNECTION CORROSION IN THE TAIL LAMP. \*RM
- [SIB\-63\-02\-08](/bulletins/10035224.md), 2011-02-11, Service bulletin: EXTERIOR LIGHTING:TAIL LIGHTS. BMW VEHICLE: REAR BULB FAILURE. THE BULB OUT WARNING SHOWS IN THE INSTRUMENT CLUSTER. DIAGNOSIS SHOWS A FAULT FOR THE REAR LAMP. THE BULB OUT CAN BE DISPLAYED FOR 2 POSSIBLE CAUSES: POOR FIT BETWEEN THE BULB AND BULB HOLDER; BULB FAILURE CAUSED BY VIBRATION. \*PE

JSON: [/v1/bulletins/10034186](/v1/bulletins/10034186)

[Report an error on this page](https://github.com/wenmar-pro/wenmar-open/issues/new?template=data_correction.yml&title=Data%20correction%3A%20Service%20bulletin%20SI-B-63-06-10&page=https%3A%2F%2Fopen.wenmarpro.com%2Fbulletins%2F10034186&vehicle=Service%20bulletin%20SI-B-63-06-10)