WenmarOpen by Wenmar Pro

Service bulletin TSB-071

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

The communication, as NHTSA indexes it (as of 2026-10-19)
TypeService bulletin
NHTSA id10033973
Published by NHTSA2010-10-02
Manufacturer's numberTSB-071
Manufacturer's date2010-06-01
NHTSA componentENGINE AND ENGINE COOLING:ENGINE

NHTSA's summary

KIA: DTC P0128 AND THERMOSTAT INSPECTION AND/OR REPLACEMENT. SOME VEHICLES MAY EXHIBIT THE MIL (MALFUNCTION INDICATOR LAMP) ILLUMINATION WITH DTC P0128 STORED IN MEMORY. DURING THIS TIME PERIOD MANUFACTURING EQUIPMENT MAY HAVE AFFECTED THE PERFORMANCE OF THE THERMOSTAT. *PE

The document

No address for NHTSA's copy can be built for this communication. Ask the dealer for it by the manufacturer's number.

Components

Engine

Trouble codes named

P0128

Vehicles listed
KIA SOUL2010

Listing a model year does not mean every vehicle of it is concerned: the document says which.

Other bulletins for the same vehicles and component
PS7312022-06-03. Service bulletin. PITSTOP: DTC P0011/ P0014/ P0016/ P0017 DUE TO INCORRECT CAMSHAFT RELUCTOR WHEEL CONFIGURATION - This Pitstop provides information on some 2010-2013MY Soul (AM), 2014-2019MY Soul (PS), and 2020~MY Soul (SK3) vehicles equipped with the engines listed below, which may set DTC P0011, P0014, P0016, or P0017 after an engine replacement. If these DTCs were not present prior to engine replacement, the camshaft reluctor wheel (also called pulse wheel) may not be in the correct position when engine is at Top Dead Center and may be sending an erroneous signal to the PCM, causing the DTC. Follow the procedure outlined in this publication, with engine set to Top Dead Center (TDC), to inspect and identify whether the reluctor wheel is correctly clocked on the camshaft, and if not, how to correctly position it.
TSB_ENG045_CLSD2021-06-02. Service bulletin. TSB_ENG045_CLOSED: TECHNICAL SERVICE BULLETIN CLOSED
TSB_CHA084_R62020-12-02. Service bulletin. TECHNICAL SERVICE BULLETIN: PARTIAL REPAIR OF C-MDPS MOTOR, ECU, WORM GEAR AND/OR STEERING COLUMN HOUSING - This bulletin has been revised to include additional information. New/revised sections of this bulletin are indicated by a black bar in the margin area. This bulletin provides information regarding the partial repair of the Motor Driven Power Steering (MDPS) Motor, Electronic Control Unit (ECU), Worm Gear Assembly or Steering Column Housing on some 2010MY~ Kia models listed on page 8, equipped with a Column Motor Driven Power Steering (C-MDPS) unit.
TSB_CHA084_R52020-12-02. Service bulletin. TECHNICAL SERVICE BULLETIN: PARTIAL REPAIR OF C-MDPS MOTOR, ECU, WORM GEAR AND/OR STEERING COLUMN HOUSING - This bulletin has been revised to include additional information. New/revised sections of this bulletin are indicated by a black bar in the margin area. This bulletin provides information regarding the partial repair of the Motor Driven Power Steering (MDPS) Motor, Electronic Control Unit (ECU), Worm Gear Assembly or Steering Column Housing on some 2010MY~ Kia models listed on page 8, equipped with a Column Motor Driven Power Steering (C-MDPS) unit.
TSBCHA084_R42019-12-09. Service bulletin. TECHNICAL SERVICE BULLETIN: PARTIAL REPAIR OF C-MDPS MOTOR, ECU AND/OR STEERING COLUMN HOUSING - This bulletin has been revised to include additional information.This bulletin provides information regarding the partial repair of the Motor Driven Power Steering (MDPS) Motor, Electronic Control Unit (ECU) or Steering Column Housing on some 2010MY~ Kia models listed on page 5 equipped with a Column Motor Driven Power Steering (C-MDPS) unit. Follow the MDPS Flowchart (page 2) along with the MDPS DTC Table (page 3) procedure outlined in this bulletin before replacing the C-MDPS Motor, ECU or Steering Column Housing.
PS067_R12018-11-13. Service bulletin. PITSTOP: CYLINDER HEAD STEEL BALL INSPECTION AND INSTALLATION - This Pitstop provides information regarding the inspection and installation of the steel sealing ball on: * 3.3L & 3.8L Lambda engines for 2007-2008MY Sorento (BL), * 2.0L Nu engines for 2010-2019MY Soul (AM, PS), and * 1.8L & 2.0L Nu engines for 2010-2018MY Forte (TD, YD/YDm), 2019MY~ Forte (BDm). When replacing the cylinder heads on these engines, inspect the lubrication ports for installation of the steel sealing balls. Current replacement cylinder heads may not be equipped with the required steel balls. Identify and locate the nine (9) lubricant passages on 3.3L and 3.8L engines and three (3) on 1.8L and 2.0L engines and verify a steel ball is installed in each.
PS5392018-04-16. Service bulletin. PITSTOP - ENGINE COMPONENT RE-USE GUIDELINES - In general, parts and components removed during engine repairs should be considered serviceable, and should be thoroughly cleaned and transferred to the new engine.
TSB-0462009-09-25. Service bulletin. KIA MOTORS: RELATING TO OIL CONTROL VALVE (OCV) USED IN CONSTANT VARIABLE VALVE TIMING (CVVT). IF AT ANY TIME OCV IS SUSPECTED AS A CAUSE OF ROUGH IDLING, POOR ACCELERTION, CAMSHAFT TIMING MISALIGNMENT RELATED TROUBLE CODES, MISFIRE RELATED TROUBLE CODES ETC., ON THE VEHICLE EQUIPPED WITH THE CVVT SYSTEM, BE SURE TO PERFORM THE OCV INSPECTION PROCEDURE BELOW BEFORE REPLACEMENT. NO MODEL YEARS SPECIFIED. *PE