# Service bulletin TB\-K\-050

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

- Type: Service bulletin
- NHTSA id: 10033087
- Published by NHTSA: 2010\-07\-02
- Manufacturer's number: TB\-K\-050
- Manufacturer's date: 2009\-10\-30
- NHTSA component: ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL

## NHTSA's summary

JAGUAR: MALFUNCTION INDICATOR LAMP ILLUMINATION. ON CERTAIN VEHICLES EQUIPPED WITH 4.2L V8 ENGINE ONLY, THE ENGINE MALFUNCTION INDICATOR LAMP \(MIL\) MAY BE ILLUMINATED WITH DIAGNOSTIC TROUBLE CODE \(DTC\) P0411 STORED IN THE ENGINE CONTROL MODULE. \*PE

## The document

No address for NHTSA's copy can be built for this communication. Ask the dealer for it by the manufacturer's number.

## Components

Electrical system, Instrument cluster

## Trouble codes named

P0411

## Vehicles listed

- 2010 JAGUAR XF

## Other bulletins for the same vehicles and component

- [DVD13406](/bulletins/10228555.md), 2023-01-03, Service bulletin: STEERING; SERVICE BRAKES, HYDRAULIC; TIRES:PRESSURE MONITORING AND REGULATING SYSTEMS; ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL; ELECTRICAL SYSTEM:SOFTWARE. This update contains an enhancement to the TPMS \- Tire Pressure Monitoring System
- [SSM71678](/bulletins/10097444.md), 2017-04-17, Service bulletin: ELECTRICAL SYSTEM:SOFTWARE; ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL; STEERING:COLUMN. "ISSUE: A CUSTOMER MAY REPORT THEIR STEERING COLUMN DOES NOT MOVE WHEN TRYING TO ADJUST IN A UP/DOWN OR IN/OUT MOVEMENT. CAUSE: WHEN THE INSTRUMENT PANEL CLUSTER SOFTWARE IS UPDATED, THE STEERING COLUMN CALIBRATION WILL REVERT TO IT'S DEFAULT VALUES. THIS WILL RESULT IN NO STEERING COLUMN MOVEMENT."
- [SSM72307](/bulletins/10096700.md), 2017-03-30, Service bulletin: EQUIPMENT:ELECTRICAL; ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL; ELECTRICAL SYSTEM; EQUIPMENT:APPLIANCE:AIR CONDITIONER. "ISSUE THE MESSAGE ""RADAR SENSOR BLOCKED"" APPEARS IN INSTRUMENT PACK DISPLAY. IF BLOCKAGE OCCURS WHILE ACC IS BEING USED, “DRIVER INTERVENE” AND/OR ""RADAR SENSOR BLOCKED"" MESSAGE WILL APPEAR ON THE CLUSTER AND DTC C1A67\-97 IS ALSO SET. BLOCKAGE CAN ALSO OCCUR WHEN ACC IS NOT BEING USED. CAUSE ""RADAR SENSOR BLOCKED"" INDICATES THAT THE ADAPTIVE SPEED CONTROL SYSTEM'S VISIBILITY HAS BEEN REDUCED DUE TO AN OBSTRUCTION. ACC CONTINUALLY SCANS FOR OBJECTS AHEAD AND, IF IT SEES NO OBJECTS I.E. VEHICLES, ROAD SIGNS, LAMPPOSTS, GUARD RAILS ETC, IT WILL INDICATE A BLOCKAGE EVEN IF THE ACC IS NOT USED. THE C1A67\-97 DTC FLAGS A RADAR BLOCKAGE SITUATION AND NOT A SYSTEM FAULT."
- [SSM72000](/bulletins/10096150.md), 2017-03-22, Service bulletin: EQUIPMENT ADAPTIVE/MOBILITY; ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL. "ISSUE THE ADAPTIVE CRUISE FUNCTION DOES NOT OPERATE. THE INSTRUMENT PACK WILL SHOW A YELLOW WARNING TRIANGLE AND THE MESSAGE ""RADAR SENSOR BLOCKED” ALSO ON INTERROGATION OF THE MODULE THE FOLLOWING CODE WOULD BE LOGGED C1A67\-97, “FORWARD LOOKING SENSOR OBSTRUCTED OR BLOCKED”. CAUSE THE RADAR IS LOCATED BELOW THE FRONT NUMBER PLATE PLINTH ON THIS MODEL. IF THE INCORRECT SIZE NUMBER PLATE OR MULTIPLE NUMBER PLATES ARE FITTED THIS CAN OBSTRUCT THE RADAR."
- [SSM\-72307](/bulletins/10079083.md), 2016-09-01, Service bulletin: ELECTRICAL SYSTEM; ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL. "ISSUE THE MESSAGE ""RADAR SENSOR BLOCKED"" APPEARS IN INSTRUMENT PACK DISPLAY. IF BLOCKAGE OCCURS WHILE ACC IS BEING USED, “DRIVER INTERVENE” AND/OR ""RADAR SENSOR BLOCKED"" MESSAGE WILL APPEAR ON THE CLUSTER AND DTC C1A67\-97 IS ALSO SET. BLOCKAGE CAN ALSO OCCUR WHEN ACC IS NOT BEING USED. CAUSE ""RADAR SENSOR BLOCKED"" INDICATES THAT THE ADAPTIVE SPEED CONTROL SYSTEM'S VISIBILITY HAS BEEN REDUCED DUE TO AN OBSTRUCTION. ACC CONTINUALLY SCANS FOR OBJECTS AHEAD AND, IF IT SEES NO OBJECTS I.E. VEHICLES, ROAD SIGNS, LAMPPOSTS, GUARD RAILS ETC, IT WILL INDICATE A BLOCKAGE EVEN IF THE ACC IS NOT USED. THE C1A67\-97 DTC FLAGS A RADAR BLOCKAGE SITUATION AND NOT A SYSTEM FAULT."
- [JTB\-00419NAS\-1](/bulletins/10079041.md), 2016-09-01, Service bulletin: ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL. "SITUATION: THE SURFACE OF THE INSTRUMENT CLUSTER LENS MAY BE DAMAGED OR MARKED. CAUSE: A LOWER\-LEVEL SERVICE REPAIR PART IS NOW AVAILABLE IN THE EVENT DAMAGE OR MARKING IS CAUSED BY AN OBJECT IMPACTING AGAINST THE LENS AND/OR STAINING/DISCOLORATION CONTAMINATION CAUSED BY USING ANY TYPE OF CLEANING PRODUCT ON THE LENS."
- [JTB00308NAS1](/bulletins/10064228.md), 2016-05-09, Service bulletin: ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL. SUMMARY TO BE PROVIDED ON A FUTURE DATE.

JSON: [/v1/bulletins/10033087](/v1/bulletins/10033087)

[Report an error on this page](https://github.com/wenmar-pro/wenmar-open/issues/new?template=data_correction.yml&title=Data%20correction%3A%20Service%20bulletin%20TB-K-050&page=https%3A%2F%2Fopen.wenmarpro.com%2Fbulletins%2F10033087&vehicle=Service%20bulletin%20TB-K-050)