# Service bulletin TSB\-94\-09\-13

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

- Type: Service bulletin
- NHTSA id: 10030631
- Published by NHTSA: 2009\-10\-31
- Manufacturer's number: TSB\-94\-09\-13
- Manufacturer's date: 2009\-05\-19
- NHTSA component: EXTERIOR LIGHTING:HEADLIGHTS; EXTERIOR LIGHTING:HEADLIGHTS:HIGH/LOW BEAM DIMMER SWITCH

## NHTSA's summary

AUDI: LOW BEAM HEADLIGHT REPAIR AUTHORIZATION. ONE HALOGEN BULB ON ONE SIDE IS INOPERATIVE. ONE OF THE FOLLOWING DATA ENTRIES MAY BE PRESENT IN THE 09; CENTRAL ELECTRONICS CONTROL MODULE J519\-DTC 00978 \(LEFT LOW BEAM\), DTC 00979 \(RIGHT LOW BEAM\). \*PE

## The document

No address for NHTSA's copy can be built for this communication. Ask the dealer for it by the manufacturer's number.

## Components

Lighting, Headlights

## Vehicles listed

- 2009 AUDI Q7

## Other bulletins for the same vehicles and component

- [A9423672071954\_1](/bulletins/10244595.md), 2023-11-06, Service bulletin: EXTERIOR LIGHTING:TAIL LIGHTS; EXTERIOR LIGHTING:HEADLIGHTS. This bulletin provides information pertaining to when there are foreign objects inside of a headlight or taillight.
- [A941200 2024877\-](/bulletins/10122672.md), 2017-11-08, Service bulletin: EQUIPMENT; ELECTRICAL SYSTEM; EXTERIOR LIGHTING:HEADLIGHTS. Supersedes Technical Service Bulletin Group 94 number 12\-83 dated July 9, 2012. Warning light for dynamic headlight range control is displayed in the instrument cluster. DTC 00003 / 14 \(Control unit faulty\) is registered in the dynamic headlight range control unit, address word 55. Both headlights function normally. Vehicles equipped with adaptive \(cornering\) lighting. New software version 0010 in the dynamic headlight range control module addresses this condition. If the headlight range control module has a software version lower than 0010 installed, then use the SVM code listed in Service to update the module. Some control units will already have software version 0010 installed but can still exhibit the conditions mentioned above. When this occurs, the software will need to be reflashed using a separate SVM code. The corrupt software will be overwritten. The software version does not change after the update.
- [A941435 2024877\-](/bulletins/10122305.md), 2017-11-08, Service bulletin: EXTERIOR LIGHTING:HEADLIGHTS. Supersedes Technical Service Bulletin Group 94 number 12\-00 dated December 21, 2012. The warning light for dynamic headlight range control is displayed in the instrument cluster. DTC 00003 \- 14 is stored in the headlamp range control module, J431 \(address word 55\). Both headlights function normally. The vehicle is equipped with adaptive \(cornering\) lighting. There is a software issue in the dynamic headlight range control module.
- [A941675 2024896\-](/bulletins/10120635.md), 2017-10-25, Service bulletin: EXTERIOR LIGHTING:HEADLIGHTS. The healight switch holder is broken, which causes the healight switch assembly to be loose or fall into the dashboard. The rivets that hold the headlight switch holder in the dashboard can break if the headlight switch is bumped \(by driver entering vehicle\).
- [A941565 2012749\-](/bulletins/10120003.md), 2017-10-21, Service bulletin: EXTERIOR LIGHTING:HEADLIGHTS. Supersedes Technical Service Bulletin Group 94 number 12\-92 dated October 24, 2012. Condensation is visible on the inside of the headlight, taillight, fog light, side marker light, front turn signal, daytime running lights, or third brake light lens.
- [TSB\-94\-12\-83](/bulletins/10045462.md), 2012-09-07, Service bulletin: EXTERIOR LIGHTING:HEADLIGHTS; ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL. AUDI: THE INSTRUMENT CLUSTER DISPLAYS WARNING FOR HEADLIGHT DYNAMIC RANGE CONTROL MODULE. \*PE
- [TSB\-94\-12\-76](/bulletins/10045461.md), 2012-09-07, Service bulletin: ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL; EXTERIOR LIGHTING:HEADLIGHTS. AUDI: DISPLAYED IN THE INSTRUMENT CLUSTER IS THE WARNING FOR THE DYNAMIC HEADLIGHT RANGE CONTROL. \*PE
- [TSB\-94\-12\-82](/bulletins/10045046.md), 2012-08-14, Service bulletin: ELECTRICAL SYSTEM:SOFTWARE; EQUIPMENT ADAPTIVE/MOBILITY; EXTERIOR LIGHTING:HEADLIGHTS. AUDI: INSTRUMENT CLUSTER ILLUMINATES SHOWING HEADLIGHT DYNAMIC RANGE CONTROL, WHICH MAY HAVE FAULTY CONTROL UNIT. MODELS A8, A6 AND AUDI Q7 \(2008\-13\). \*PE
- [TSB\-70\-10\-21](/bulletins/10036570.md), 2011-03-30, Service bulletin: EXTERIOR LIGHTING:HEADLIGHTS:SWITCH. AUDI: HEADLIGHT SWITCH IS LOOSE OR FALLS INTO DASHBOARD. THE HOLDER FOR THE HEADLIGHT SWITCH IS BROKEN, SO THE HEADLIGHT SWITCH ASSEMBLY IS LOOSE OR FALLS INTO THE DASHBOARD. WHEN STEPPING INTO THE VEHICLE, THE DRIVER CAN HIT THE HEADLIGHT SWITCH WITH HIS/HER LEG OR KNEE. AS A RESULT, THE RIVETS HOLDING THE HEADLIGHT SWITCH HOLDER IN THE DASHBOARD BREAKS. \*PE
- [TSB\-94\-10\-38](/bulletins/10035345.md), 2011-02-16, Service bulletin: EXTERIOR LIGHTING:HEADLIGHTS. AUDI: DAYTIME RUNNING LIGHTS DO NOT WORK. DAYTIME RUNNING LIGHTS DO NOT WORK ON VEHICLES WITH XENON HEADLIGHTS. THE THUMB WHEEL OR OPTION FOR DAYTIME RUNNING LIGHTS IS TURNED OFF BY MISTAKE. \*PE

JSON: [/v1/bulletins/10030631](/v1/bulletins/10030631)

[Report an error on this page](https://github.com/wenmar-pro/wenmar-open/issues/new?template=data_correction.yml&title=Data%20correction%3A%20Service%20bulletin%20TSB-94-09-13&page=https%3A%2F%2Fopen.wenmarpro.com%2Fbulletins%2F10030631&vehicle=Service%20bulletin%20TSB-94-09-13)