# Service bulletin SI B52 05 08

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

- Type: Service bulletin
- NHTSA id: 10025848
- Published by NHTSA: 2008\-09\-10
- Manufacturer's number: SI B52 05 08
- Manufacturer's date: 2008\-06\-01
- NHTSA component: SEATS

## NHTSA's summary

BMW: SEAT FRAME DESIGN CHANGED FOR 392 \(3 SERIES COUPE\) PRODUCED UP TO MAY 2007. ON EARLY PRODUCTION E92S, THE SOCKET WHICH SECURES THE SEAT BACKREST RELEASE CABLE TO THE RELEASE MECHANISM COULD PULL FREE FROM THE RELEASE MECHANISM. \*PE

## The document

No address for NHTSA's copy can be built for this communication. Ask the dealer for it by the manufacturer's number.

## Components

Seats

## Vehicles listed

- 1994 to 1995 BMW 3 SERIES
- 1994 to 1998 BMW 3 SERIES
- 1994 to 1996 BMW 3 SERIES
- 1994 to 1996 BMW 3 SERIES
- 1994 to 1995 BMW 3 SERIES
- 1994 to 1995 BMW 3 SERIES
- 1994 to 1996 BMW 3 SERIES
- 1996 to 2000 BMW 3 SERIES
- 1996 to 2000 BMW 3 SERIES
- 1996 to 2000 BMW 3 SERIES
- 1998 to 2000 BMW 3 SERIES
- 1998 to 2000 BMW 3 SERIES
- 1999 to 2000 BMW 3 SERIES
- 1999 to 2000 BMW 3 SERIES
- 1999 to 2000 BMW 3 SERIES
- 2000 to 2006 BMW 3 SERIES
- 2001 to 2006 BMW 3 SERIES
- 2001 to 2006 BMW 3 SERIES
- 2001 to 2006 BMW 3 SERIES
- 2002 to 2006 BMW 3 SERIES
- 2002 to 2006 BMW 3 SERIES
- 2007 BMW 3 SERIES
- 2007 BMW 3 SERIES
- 2007 BMW 3 SERIES
- 2007 BMW 3 SERIES
- 2003 BMW 3\-SERIES
- 2003 BMW 3\-SERIES
- 2003 BMW 3\-SERIES
- 2003 BMW 3\-SERIES
- 2003 BMW 3\-SERIES
- 2003 BMW 3\-SERIES

## Recalls for the same vehicles and component

- [2008307](/recalls/tc/2008307.md), 2008-08-26: Seats And Restraints
- [1999086](/recalls/tc/1999086.md), 1999-05-17: Seats And Restraints

## Other bulletins for the same vehicles and component

- [651013](/bulletins/10150264.md), 2018-12-03, Service bulletin: SEATS. "The replacement OC3 seat mat \(front passenger seat occupancy\) will not enable when following ISTA Repair Instruction REP 65 77 604, ""Replacing sensor mat \(OC3 mat\) for passenger seat occupancy detector."" 1. When the new mat is installed in the vehicle, too much pre\-load pressure will prevent the mat from being enabled. ISTA/P WILL NOT enable the new part, and will cause permanent damage to it. 2. The new part has incorrect coding."
- [B010118](/bulletins/10142910.md), 2018-07-16, Service bulletin: SEATS. FRONT PASSENGER SEAT OCCUPANCY \(OC3\) MAT FOR SRS: LIMITED WARRANTY EXTENSION TO 15 YEARS/UNLIMITED MILES

JSON: [/v1/bulletins/10025848](/v1/bulletins/10025848)

[Report an error on this page](https://github.com/wenmar-pro/wenmar-open/issues/new?template=data_correction.yml&title=Data%20correction%3A%20Service%20bulletin%20SI%20B52%2005%2008&page=https%3A%2F%2Fopen.wenmarpro.com%2Fbulletins%2F10025848&vehicle=Service%20bulletin%20SI%20B52%2005%2008)