WenmarOpen by Wenmar Pro

Service bulletin 94-07-08

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

The communication, as NHTSA indexes it (as of 2026-10-19)
TypeService bulletin
NHTSA id10025622
Published by NHTSA2008-08-27
Manufacturer's number94-07-08
Manufacturer's date2007-06-29
NHTSA componentEXTERIOR LIGHTING

NHTSA's summary

THE BULB WARNING FOR THE DAYTIME RUNNING LIGHTS IN THE INSTRUMENT CLUSTER. *PE

The document

No address for NHTSA's copy can be built for this communication. Ask the dealer for it by the manufacturer's number.

Components

Lighting

Vehicles listed
AUDI A32006, 2007, 2008, 2009
AUDI A42005, 2006, 2007, 2008, 2009
AUDI RS 42007, 2008
AUDI RS42009
AUDI TT2008, 2009

Listing a model year does not mean every vehicle of it is concerned: the document says which.

Other bulletins for the same vehicles and component
A9423672071954_12023-11-06. Service bulletin. This bulletin provides information pertaining to when there are foreign objects inside of a headlight or taillight.
94F6UPDATE2023-10-10. Service bulletin. Tail Lamp Seal (NVLW)
A9421362023322_32021-04-06. Service bulletin. This informational bulletin contains information on the different shading of LED headlights.
A9419182012749_12020-01-08. Service bulletin. Exterior lights, moisture accumulation 2013-2021 A3 Cabriolet, 2016-2018 Sportback, 2004-2005 A4 Cabriolet, 2004-2008 S4 Cabriolet, 2008 RS4 Cabriolet, 2010-2021 A4 allroad, 2018-2021 A5 Sportback, 2010-2012, 2018-2021 RS5 Cabriolet, 2018-2021 S5 Sportback, 2004-2006 A7, 2004-2011 S7, 2021 RS6 Avant, 2004-2006 S8
SM 52-20172018-02-05. Service bulletin. This special notice is to inform dealers to return all tail lamps with the part number listed that are below generation 14s.
A941791 2012749-2018-02-05. Service bulletin. This informational bulletin contains technical information for when there is condensation visible on the inside of the headlight, taillight, fog light, side marker light, front turn signal, daytime running lights, and/or third brake light lens.
A941306 2017806-2017-11-17. Service bulletin. Supersedes Technical Service Bulletin Group 94 number 12-79 dated June 6, 2012. Light bulb warning light and the message Vehicle lights: malfunction is displayed in the instrument cluster display. DTC 03280 (Light switch position implausible signal) is stored in the vehicle electrical system control module, J519 (09). Exterior lights are functioning properly. If the headlight switch is moved to an intermediate position and remains there, the light bulb warning light and the error message appear after approximately ten seconds. Once displayed, the message turns off after approximately five seconds. The light bulb warning light turns off only after the headlight switch is turned to a defined position, and the status of DTC 03280 is changed to sporadic. After 40 driving cycles without an implausible signal detected, the DTC is automatically cleared.
A941312 2017566-2017-11-17. Service bulletin. Supersedes Technical Service Bulletin Group 94 number 09-23 dated August 12, 2009. Headlight switch knob is pressed in. The switch functions correctly. The headlight switch knob was designed with a normal position and a pushed-in position. This is a deliberate design feature designed to avoid injuries in the event of a collision.
A941296 2027773-2017-11-08. Service bulletin. Supersedes Technical Service Bulletin Group 94 number 12-69 dated March 15, 2012. Part or all of the daytime running lights do not work on vehicles with LED DRLs. For vehicles with halogen DRLs, please reference TSB 2017488, 94 Halogen Daytime running lights do not work. In the past, the daytime running light bulbs were a serviceable part. In this application, the LED strip cannot be replaced, and may have an associated control module. This TSB is for servicing information only.
A941290 2030956-2017-11-08. Service bulletin. Supersedes Technical Service Bulletin Group 94 number 12 ? 88 dated September 25, 2012. The turn signal indicator lens is inoperative without any damage from outside influence. Cracks have formed in the lens and as a result condensation can be seen behind the lens. The turn signal lens can crack due to the high amount of tension in the side mirror housing. The tension is due to improper installation of the mirror at the factory and is not a defect in the mirror housing. Replacing the mirror housing will not affect this condition.