WenmarOpen by Wenmar Pro

Service bulletin 060852002

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

The communication, as NHTSA indexes it (as of 2026-10-19)
TypeService bulletin
NHTSA id10022925
Published by NHTSA2007-10-05
Manufacturer's number060852002
Manufacturer's date2008-11-01
ReplacesSB-06-08-52-002G
NHTSA componentELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL

NHTSA's summary

REMOTE KEYLESS ENTRY (RKE) INOPERATIVE, POOR RANGE, TIRE PRESSURE MONITOR (TPM) MESSAGE DISPLAYED, REMOTE VEHICLE START (RVS) (REPLACE RKE TRANSMITTERS AND REPROGRAM REMOTE CONTROL DOOR LOCK RECEIVER (RCDLR). *NJ UPDATED 5/14/09. *PE

The document

No address for NHTSA's copy can be built for this communication. Ask the dealer for it by the manufacturer's number.

Components

Electrical system, Instrument cluster

Vehicles listed
CADILLAC ESCALADE2007
CHEVROLET AVALANCHE 15002007 (the catalog's model; the bulletin names a series or trim of it)
CHEVROLET AVALANCHE 25002007 (the catalog's model; the bulletin names a series or trim of it)
CHEVROLET EQUINOX2007
CHEVROLET SUBURBAN 15002007 (the catalog's model; the bulletin names a series or trim of it)
CHEVROLET TAHOE2007
GMC YUKON2007
PONTIAC TORRENT2007

Listing a model year does not mean every vehicle of it is concerned: the document says which.

Other bulletins for the same vehicles and component
PIT52082023-12-26. Service bulletin. Fuel Gauge Shows Empty After Refueling And DTC P2636.
PIT5195B2023-12-26. Service bulletin. Speedometer Needle Accuracy Information.
PIT51952023-12-26. Service bulletin. Speedometer Needle Accuracy Information
PIT52082023-12-11. Service bulletin. Fuel Gauge Shows Empty After Refueling And DTC P2636.
PIT5195B2023-12-11. Service bulletin. Speedometer Needle Accuracy Information.
PIT51952023-12-11. Service bulletin. Speedometer Needle Accuracy Information
130089004H2023-12-11. Service bulletin. Car and Truck Fix it Right the First Time Issues
07-08-49-020R2023-10-18. Service bulletin. This informational bulletin provides information for the IPC odometer programming method quick reference guide.
PIT5195G2022-06-13. Service bulletin. This Preliminary Information communication provides information to the technician about vehicles that the speedometer needle appears to be inaccurate. Dealer should advise the customer the specification for speedometer needle accuracy is +/- 2 MPH at any given speed when looking straight at the needle.
07-08-49-020J2021-04-20. Service bulletin. IPC Odometer Programming Method Quick Reference Guide Season Odometer Programming Methods in Use Today 1. IPC reprogramming and setup using the service programming system (SPS). 2. Odometer setup at the electronic service center (ESC) when using an exchange IPC/DIC. 3. Tech 2® – The Tech 2 is used to set up a replacement BCM, which includes loading the odometer value that is displayed and stored in the IPC. A replacement IPC will display the previously stored vehicle odometer value, communicated from the BCM, after cycling the ignition or driving the vehicle. *The odometer programming is integrated as part of the BCM programming procedure. It is not a stand-alone event.