Service bulletin 4486
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
| Type | Service bulletin |
|---|---|
| NHTSA id | 10022914 |
| Published by NHTSA | 2007-10-04 |
| Manufacturer's number | 4486 |
| NHTSA component | ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL |
NHTSA's summary
ONE OF THE FOLLOWING CONCERNS WHEN PROGRAMMING THE MILEAGE OR THE HOURS INTO AN EXCHANGE INSTRUMENT PANEL CLUSTER THAT IS RECEIVED FROM AN ELECTRONIC SERVICE CENTER (ESC). *NJ
The document
No address for NHTSA's copy can be built for this communication. Ask the dealer for it by the manufacturer's number.
Components
Electrical system, Instrument cluster
| BUICK RAINIER | 2004, 2005, 2006, 2007 |
|---|---|
| CADILLAC ESCALADE | 2003, 2004, 2005, 2006 |
| CHEVROLET AVALANCHE | 2003, 2004 |
| CHEVROLET AVALANCHE 2500 | 2005, 2006 (the catalog's model; the bulletin names a series or trim of it) |
| CHEVROLET SILVERADO | 2003, 2004, 2005, 2006, 2007 |
| CHEVROLET SUBURBAN | 2003, 2004, 2005 |
| CHEVROLET SUBURBAN 1500 | 2006 (the catalog's model; the bulletin names a series or trim of it) |
| CHEVROLET SUBURBAN 2500 | 2006 (the catalog's model; the bulletin names a series or trim of it) |
| CHEVROLET TAHOE | 2003, 2004, 2005, 2006 |
| CHEVROLET TRAILBLAZER | 2003, 2004, 2005, 2006 |
| CHEVROLET TRAILBLAZER | 2008 |
| CHEVROLET TRAILBLAZER 360 | 2007 (the catalog's model; the bulletin names a series or trim of it) |
| GMC ENVOY | 2003, 2004, 2005, 2006 |
| GMC ENVOY | 2008 |
| GMC ENVOY 360 | 2007 (the catalog's model; the bulletin names a series or trim of it) |
| GMC SIERRA | 2003, 2004, 2005, 2006 |
| GMC SIERRA 1500 | 2007 (the catalog's model; the bulletin names a series or trim of it) |
| GMC SIERRA 2500 | 2007 (the catalog's model; the bulletin names a series or trim of it) |
| GMC SIERRA 3500 | 2007 (the catalog's model; the bulletin names a series or trim of it) |
| GMC YUKON | 2003, 2004, 2005, 2006 |
| HUMMER H2 | 2003, 2004, 2005, 2006, 2007 |
| OLDSMOBILE BRAVADA | 2003, 2004 |
| SAAB 9-7X | 2005, 2006, 2007, 2008 |
Listing a model year does not mean every vehicle of it is concerned: the document says which.
| 10054E | 2024-02-12. Service bulletin. Special Coverage Adjustment - Fuel Level Sensor Contact Wear |
|---|---|
| PIT5208 | 2023-12-26. Service bulletin. Fuel Gauge Shows Empty After Refueling And DTC P2636. |
| PIT5195B | 2023-12-26. Service bulletin. Speedometer Needle Accuracy Information. |
| PIT5195 | 2023-12-26. Service bulletin. Speedometer Needle Accuracy Information |
| PIT5208 | 2023-12-11. Service bulletin. Fuel Gauge Shows Empty After Refueling And DTC P2636. |
| PIT5195B | 2023-12-11. Service bulletin. Speedometer Needle Accuracy Information. |
| PIT5195 | 2023-12-11. Service bulletin. Speedometer Needle Accuracy Information |
| 07-08-49-020R | 2023-10-18. Service bulletin. This informational bulletin provides information for the IPC odometer programming method quick reference guide. |
| PIT5195G | 2022-06-13. Service bulletin. This Preliminary Information communication provides information to the technician about vehicles that the speedometer needle appears to be inaccurate. Dealer should advise the customer the specification for speedometer needle accuracy is +/- 2 MPH at any given speed when looking straight at the needle. |
| 07-08-49-020J | 2021-04-20. Service bulletin. IPC Odometer Programming Method Quick Reference Guide Season Odometer Programming Methods in Use Today 1. IPC reprogramming and setup using the service programming system (SPS). 2. Odometer setup at the electronic service center (ESC) when using an exchange IPC/DIC. 3. Tech 2® – The Tech 2 is used to set up a replacement BCM, which includes loading the odometer value that is displayed and stored in the IPC. A replacement IPC will display the previously stored vehicle odometer value, communicated from the BCM, after cycling the ignition or driving the vehicle. *The odometer programming is integrated as part of the BCM programming procedure. It is not a stand-alone event. |