# Service bulletin 240706

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

- Type: Service bulletin
- NHTSA id: 10021955
- Published by NHTSA: 2007\-06\-27
- Manufacturer's number: 240706
- Manufacturer's date: 2007\-05\-24
- NHTSA component: ENGINE AND ENGINE COOLING:ENGINE

## NHTSA's summary

MIL ON, ENGINE MAY RUN ROUGH AFTER COLD START \(DTC'S FOR MISFIRE, P0300 \- P0306, IN ECM\). \*KB

## The document

No address for NHTSA's copy can be built for this communication. Ask the dealer for it by the manufacturer's number.

## Components

Engine

## Trouble codes named

P0300, P0306

## Vehicles listed

- 2007 AUDI Q7

## Other bulletins for the same vehicles and component

- [43132020173257](/bulletins/10251015.md), 2024-03-04, Service bulletin: SUSPENSION; ENGINE AND ENGINE COOLING. No communication with 34 module, vehicle lowers after engine start, air suspension warning lights blink
- [1712322018550](/bulletins/10250430.md), 2024-02-20, Service bulletin: ENGINE AND ENGINE COOLING. Oil consumption measurement \- Repair Authorization \(CA\)
- [0113702018260](/bulletins/10250424.md), 2024-02-20, Service bulletin: ENGINE AND ENGINE COOLING. MIL on \(P1545, P0121, P0123, P0221 or P0222 stored in ECM\)
- [0112552030192](/bulletins/10250413.md), 2024-02-20, Service bulletin: ENGINE AND ENGINE COOLING; POWER TRAIN. Engine may have reduced performance without significant loss of power or stalling
- [Edition92](/bulletins/10231130.md), 2023-02-06, Service bulletin: ENGINE AND ENGINE COOLING:COOLING SYSTEM. Idenifying and mixing factory fill engine coolants
- [01135020301922](/bulletins/10228345.md), 2023-01-03, Service bulletin: ENGINE AND ENGINE COOLING. A deformed oil seal behind the potentiometer \(Figure 1\) causes a linkage of the intake manifold flap adjustment to stick, which sets the DTCs.
- [01137620182607](/bulletins/10225032.md), 2022-10-31, Service bulletin: ENGINE AND ENGINE COOLING:ENGINE:ENGINE CONTROL MODULE \(ECU/ECM\). Contact resistance in the ECM wiring ? throttle valve.
- [01135020301922](/bulletins/10225024.md), 2022-10-31, Service bulletin: ENGINE AND ENGINE COOLING. A deformed oil seal behind the potentiometer \(Figure 1\) causes a linkage of the intake manifold flap adjustment to stick, which sets the DTCs.
- [01139320192082](/bulletins/10222021.md), 2022-09-26, Service bulletin: ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:MANIFOLD/HEADER/MUFFLER/TAIL PIPE. If, during winter months, the vehicle is used mainly for short trips, it is possible for an excessive amount of condensed water to collect in the rear muffler. When the condensed water level in the muffler reaches a certain point, it is possible for this water to run into the exhaust pipe and freeze overnight, preventing the engine from starting.
- [01137620182607](/bulletins/10222005.md), 2022-09-26, Service bulletin: ENGINE AND ENGINE COOLING:ENGINE:ENGINE CONTROL MODULE \(ECU/ECM\); ENGINE AND ENGINE COOLING:ENGINE:ENGINE CONTROL MODULE \(ECU/ECM\):SOFTWARE. Contact resistance in the ECM wiring ? throttle valve.

JSON: [/v1/bulletins/10021955](/v1/bulletins/10021955)

[Report an error on this page](https://github.com/wenmar-pro/wenmar-open/issues/new?template=data_correction.yml&title=Data%20correction%3A%20Service%20bulletin%20240706&page=https%3A%2F%2Fopen.wenmarpro.com%2Fbulletins%2F10021955&vehicle=Service%20bulletin%20240706)