# Service bulletin 0601016

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

- Type: Service bulletin
- NHTSA id: 10021259
- Published by NHTSA: 2007\-03\-26
- Manufacturer's number: 0601016
- Manufacturer's date: 2006\-12\-01
- NHTSA component: ENGINE AND ENGINE COOLING:ENGINE

## NHTSA's summary

OIL CONTROL VALVE INSPECTION AND / OR REPLACEMENT. \*KB

## The document

No address for NHTSA's copy can be built for this communication. Ask the dealer for it by the manufacturer's number.

## Components

Engine

## Vehicles listed

- 2007 HYUNDAI ENTOURAGE

## Other bulletins for the same vehicles and component

- [26\-EM\-015H TSB](/bulletins/11038456.md), 2026-10-13, Service bulletin: ENGINE. Certain vehicles equipped with internal combustion engines may exhibit higher\-than\-expected engine oil consumption. This bulletin provides the inspection and repair procedures for vehicles exhibiting this condition. All internal combustion engines consume engine oil as part of normal engine operation. Oil consumption rates may vary based on mileage, operating conditions, driving habits, and maintenance history. Hyundai recommends following the prescribed maintenance schedule and periodically checking the engine oil level using the dipstick to maintain proper engine oil level.
- [23\-EM\-005H](/bulletins/10247189.md), 2023-12-15, Service bulletin: ENGINE AND ENGINE COOLING. This bulletin provides important checkpoint guidelines when performing engine oil and filter change services.
- [22\-EM\-010H](/bulletins/10217251.md), 2022-08-05, Service bulletin: ENGINE AND ENGINE COOLING. Follow the guidelines outlined in this bulletin to inspect and clean or replace certain components of the engine intake system accordingly during engine short block or sub\-assembly replacement.
- [21\-EM\-004H](/bulletins/10190044.md), 2021-04-07, Service bulletin: EQUIPMENT; ENGINE AND ENGINE COOLING. This bulletin provides the service procedure for engine connecting rod bearing clearance testing. Perform the procedure outlined in this bulletin to fulfill the Bearing Clearance Test inspection requirements to determine next required steps.
- [21\-EM\-003H](/bulletins/10189989.md), 2021-04-06, Service bulletin: EQUIPMENT; ENGINE AND ENGINE COOLING. This bulletin provides the inspection procedure and repair guidelines for certain vehicles listed below.
- [DOR\-M9J4S\-07](/bulletins/10177599.md), 2020-07-27, Service bulletin: ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:EMISSION CONTROL:CATALYTIC CONVERTOR. These SKUs are Exhaust Manifolds with Catalytic Converters. The customer communication requested return of unsold inventory due to a loss of CARB certification. These SKUs can no longer be sold as they do not meet CARB standards, but parts on vehicles are not effected.
- [DOR\-M3J3F\-07](/bulletins/10177598.md), 2020-07-27, Service bulletin: ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:EMISSION CONTROL:CATALYTIC CONVERTOR. These SKUs are Exhaust Manifolds with Catalytic Converters. The customer communication requested return of unsold inventory due to a loss of CARB certification. These SKUs can no longer be sold as they do not meet CARB standards, but parts on vehicles are not effected.
- [SB\-10\-EM\-006](/bulletins/10038212.md), 2011-06-11, Service bulletin: ENGINE AND ENGINE COOLING:ENGINE. HYUNDAI: A REVISED PROCEDURE FOR REPLACING THE TIMING CHAIN TENSIONERS. \*RM
- [TSB\-10\-FL\-010](/bulletins/10034649.md), 2010-12-15, Service bulletin: ENGINE AND ENGINE COOLING:ENGINE. HYUNDAI: DTC P2135/P0638 OR COLD ENGINE RPM FLUCTUATION; TPS REPLACEMENT AND ECM UPDATE. SOME 2.7L, 3.3L OR 3.8L ENGINES IN MODELS IDENTIFIED IN THE APPLICABILITY LIST MAY EXPERIENCE ONE OR MORE OF THE CONDITIONS LISTED. \*PE
- [TSB\-09\-AT\-018](/bulletins/10032908.md), 2010-06-11, Service bulletin: POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE \(TCM/PCM/TECM\); ENGINE AND ENGINE COOLING:ENGINE. HYUNDAI: ATA SOLENOID DIAGNOSTIC TROUBLE CODES P0740, P0741, P0742, P0743, P0746, P0748, P0750, P0755, P0760, P0765, P0770. INCORRECT OPERATION OF THE TRANSAXLE SOLENOIDS MAY RESULT IN THE FOLLOWING SYMPTOMS\-CHECK ENGINE LIGHT ILLUMINATED; TRANSAXLE HELD IN 3RD GEAR FAIL SAFE. \*PE

JSON: [/v1/bulletins/10021259](/v1/bulletins/10021259)

[Report an error on this page](https://github.com/wenmar-pro/wenmar-open/issues/new?template=data_correction.yml&title=Data%20correction%3A%20Service%20bulletin%200601016&page=https%3A%2F%2Fopen.wenmarpro.com%2Fbulletins%2F10021259&vehicle=Service%20bulletin%200601016)