Service bulletin 040850018
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
| Type | Service bulletin |
|---|---|
| NHTSA id | 10017437 |
| Published by NHTSA | 2005-11-08 |
| Manufacturer's number | 040850018 |
| Manufacturer's date | 2004-12-01 |
| NHTSA component | SEATS:FRONT ASSEMBLY:POWER ADJUST |
NHTSA's summary
DRIVER OR PASSENGER SEAT FUNCTIONS INOPERATIVE, BLOWN SEAT FUNCTION FUSE. *TT
The document
No address for NHTSA's copy can be built for this communication. Ask the dealer for it by the manufacturer's number.
Components
Seats
| CHEVROLET CORVETTE | 2005 |
|---|
Listing a model year does not mean every vehicle of it is concerned: the document says which.
| 15521 | 2023-12-18. Service bulletin. In situations where your vehicle side doors will not open from INSIDE the vehicle due to low or no battery voltage, such as a discharged or disconnected battery, or if the vehicle is entered without the key fob or the fob is not working, the driver and passenger side doors can be opened from the inside of the vehicle by using the manual release levers located on the floor between the seats and the door openings. |
|---|---|
| 15643 | 2018-05-21. Service bulletin. 15643 ? Special Coverage. On these vehicles, the wire harness connector from the seat side airbag and buckle tensioner to the body has a design interference between the vertical adjust crossbar and the carpet. When the seat is moved forward or back, the connector may be dragged along the carpet, pulling terminals loose or pulling the connector apart. This will cause a diagnostic trouble code to be set and the service airbag light will be illuminated. Dealers are to replace the affected harness connection with a soldered connection. |
| GCUS-9-3515 | 2017-08-15. Service bulletin. 15643A - Special Coverage. On some vehicles, equipped with power seats, the wire harness connector from the seat side airbag and buckle tensioner to the body has a design interference between the vertical adjust crossbar and the carpet. When the seat is moved forward or back, the connector may be dragged along the carpet, pulling terminals loose or pulling the connector apart. This will cause a diagnostic trouble code to be set and the service airbag light will be illuminated. Dealers will replace the affected harness connectors with accessory wiring harness components. The repairs will be made at no charge to the customer. |