Service bulletin 05021
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
| Type | Service bulletin |
|---|---|
| NHTSA id | 10012861 |
| Published by NHTSA | 2005-04-01 |
| Manufacturer's number | 05021 |
| Manufacturer's date | 2005-03-14 |
| NHTSA component | ENGINE AND ENGINE COOLING:EXHAUST SYSTEM |
NHTSA's summary
EXHAUST RATTLE BUZZING NOISE PRESENT DURING ACCELERATION. *EH
The document
No address for NHTSA's copy can be built for this communication. Ask the dealer for it by the manufacturer's number.
Components
Engine, Exhaust and emissions
| NISSAN MAXIMA | 2004, 2005 |
|---|---|
| NISSAN QUEST | 2004, 2005 |
Listing a model year does not mean every vehicle of it is concerned: the document says which.
| NTB13-027C | 2022-03-12. Service bulletin. CAN COMMUNICATION – NETWORK DIAGNOSTIC FLOW CHART This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin. |
|---|---|
| NTB15055 | 2021-05-10. Service bulletin. SERVICE INFORMATION After ECM reprogramming, the Calibration Verification Number (CVN) needs to be automatically calculated prior to State emissions testing (also known as Inspection Maintainence, I/M, or SMOG testing depending upon location). Allowing the vehicle to idle for 22 minutes will allow for faster CVN calculation. It is recommended that customers utilize this method if the vehicle needs to be tested for emissions soon after ECM reprogramming. See this bulletin for further detail. |
| Revision 1-NEVAP | 2019-01-07. Service bulletin. OBD II EVAP Tube Warranty Enhancement The update below was sent out to Regions and Dealers in August of this year. We are re-circulating this update to make regional and dealer personnel aware that we are re-notifying customers at this time. |
| NTB-10-046 | 2010-08-12. Service bulletin. NISSAN: REVISED VQ35 ENGINE TIMING CHAIN PROCEDURES. REMOVAL AND INSTALLATION PROCEDURES FOR THE VQ35 ENGINE FRONT TIMING CHAIN CASE AND TIMING CHAINS (PRIMARY AND SECONDARY) HAVE BEE UPDATED TO NO LONGER REQUIRE REMOVAL OF ROCKER COVERS AND INTAKE COLLECTOR. *PE |
| NTB-05-037A | 2009-07-31. Service bulletin. NISSAN: THE MIL IS ON AND CODE P1402 EGR OPEN IS STORED IN THE ECM. INSPECT THE EGR VALVE FOR METALLIC DEBRIS. *PE |
| NTB05-080A | 2008-08-15. Service bulletin. AIRFLOWMETER SERVICE. *PE |
| 07042 | 2007-08-13. Service bulletin. BUZZING/WHINING NOISE FROM TIMING CHAIN AREA. *KB |
| 06029 | 2006-04-05. Service bulletin. ENGINE OIL COOLER GASKET AVAILABLE. *TT |
| 06009 | 2006-04-05. Service bulletin. MIL ON WITH DTC U1000 OR U1010 STORED IN ENGINE CONTROL UNIT. *TT |
| 06009 | 2006-03-01. Service bulletin. MALFUNCTION INDICATOR LAMP ON WITH DIAGNOSTIC TROUBLE CODE U1000 OR U1010 STORED IN ENGINE CONTROL UNIT. *AK |