# Service bulletin C32

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

- Type: Service bulletin
- NHTSA id: 10004545
- Published by NHTSA: 2003\-12\-19
- Manufacturer's number: C32
- Manufacturer's date: 2003\-10\-01
- NHTSA component: EQUIPMENT:OTHER:LABELS

## NHTSA's summary

SOME VEHICLES ARE EQUIPPED WITH A COMPONENT THAT CONTAINS MERCURY, BUT WAS NOT LABELED ACCORDINGLY. THE STATES OF MAINE AND VERMONT REQUIRE THAT A MERCURY CONTENT LABEL BE AFFIXED TO THE BODY OF VEHICLES THAT ARE EQUIPPED WITH COMPONENTS CONTAINING MERCURY. \*TT

## The document

No address for NHTSA's copy can be built for this communication. Ask the dealer for it by the manufacturer's number.

## Components

Equipment and accessories, Labels and manuals

## Vehicles listed

- 2004 CHRYSLER TOWN AND COUNTRY
- 2004 JEEP GRAND CHEROKEE

## Recalls for the same vehicles and component

- [04V048000](/recalls/nhtsa/04V048000.md), 2004-02-03: EQUIPMENT:OTHER:LABELS

## Other bulletins for the same vehicles and component

- [9003215](/bulletins/10221515.md), 2022-09-26, Service bulletin: EQUIPMENT. Part Description: 5.7L Long Block Issue Description: This 5.7L Long Block Assembly is compatible with both EGR and Non\-EGR applications. An EGR Block\-Off Plate \(53032739AA\) must be ordered when installing this Long Block Assembly in a Non\-EGR application. Unless, the EGR Block\-Off Plate is being transferred from the old engine.
- [9002849](/bulletins/10220995.md), 2022-09-26, Service bulletin: EQUIPMENT; STRUCTURE. Part Description: Insulator on Lever Assy Manual Valve \- Valve Body \- RWD Transmission Issue Description: The manual valve insulator, attaching rivet and instruction sheet are now available as a kit. If the insulator requires replacement please order kit 68253161AA. Insulator only used on Auto\-RWD transmission Note: The color of the insulator is not relevant for service.
- [R2118796A](/bulletins/10220489.md), 2022-09-26, Service bulletin: EQUIPMENT. Valve Body. These may cause over drive cycling.
- [3100619](/bulletins/10220097.md), 2022-09-15, Service bulletin: STRUCTURE; EQUIPMENT. Repair Parts Used For Structural Repairs This bulletin involves discussing FCA US LLC position with regard to structural repair parts usage.
- [D1602X60](/bulletins/10219763.md), 2022-09-15, Service bulletin: FUEL SYSTEM, GASOLINE:FUEL INJECTION SYSTEM:MANIFOLD PRESSURE \(MAP\) SENSOR; EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL. Extended Warranty on the Fuel Tank/Vapor Cannister
- [18\-042\-14](/bulletins/10217728.md), 2022-08-15, Service bulletin: EQUIPMENT; ELECTRICAL SYSTEM; POWER TRAIN. Generic Powertrain Control Module \(PCM\) Procedure This bulletin involves programming a generic PCM with software.
- [1400116](/bulletins/10215103.md), 2022-07-05, Service bulletin: EQUIPMENT ADAPTIVE/MOBILITY; FUEL SYSTEM, GASOLINE. This bulletin involves replacing the fuel tank and vapor canister.
- [9001784](/bulletins/10191442.md), 2021-05-03, Service bulletin: EQUIPMENT. Mechanical rocker arm, intake, 1.7 ratio.
- [05191925A$](/bulletins/10181452.md), 2020-10-26, Service bulletin: EQUIPMENT; ENGINE AND ENGINE COOLING; POWER TRAIN. Radiator If vehicle comes in for transmission fluid leaking from trans\-oil cooler fittings on the radiator, please perform the following before replacing the radiator/cooler:\~ 1. Remove both of the transmission lines from the cooler?s top/bottom flared fittings on the radiator. \~ 2. Remove hex nut and the top flared fitting on the radiator tank.\~ 3. Using a wire brush and gasket remover, clean off the old sealant on the smaller threaded portion of the flared fitting. Do the same for the threads on the trans oil cooler.\~ 4. Apply a new application of Mopar PN 04318032 to the flared fitting, leaving the first threads free for ease of engagement.\~ 5. Install the top flared fitting by hand, then torque the fitting to 235 \+/\- 15 Lb\-In.\~ 6. Install the hex nut and torque to 100 \+/\- 10 Lb\-In.\~ 7. Repeat steps 2\-6 for bottom flared fitting.\~ 8. Reinstall transmission line per normal installation procedures and ensure correct fluid level.\~
- [23\-015\-20](/bulletins/10175743.md), 2020-05-26, Service bulletin: STRUCTURE; EQUIPMENT. Disinfectant Solution Recommended for COVID\-19

JSON: [/v1/bulletins/10004545](/v1/bulletins/10004545)

[Report an error on this page](https://github.com/wenmar-pro/wenmar-open/issues/new?template=data_correction.yml&title=Data%20correction%3A%20Service%20bulletin%20C32&page=https%3A%2F%2Fopen.wenmarpro.com%2Fbulletins%2F10004545&vehicle=Service%20bulletin%20C32)