WenmarOpen by Wenmar Pro

Service bulletin 0206

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

The communication, as NHTSA indexes it (as of 2026-10-19)
TypeService bulletin
NHTSA id10000560
Published by NHTSA2003-03-25
Manufacturer's number0206
Manufacturer's date2002-09-04
NHTSA componentSERVICE BRAKES, HYDRAULIC:ANTILOCK/TRACTION CONTROL/ELECTRONIC LIMITED SLIP

NHTSA's summary

DIAGNOSTIC TROUBLE CODES 00778 AND 01044 STORED IN BRAKE ELECTRONICS DIAGNOSTIC TROUBLE CODE MEMORY. *TT

The document

No address for NHTSA's copy can be built for this communication. Ask the dealer for it by the manufacturer's number.

Components

Brakes, Anti-lock brakes

Vehicles listed
VOLKSWAGEN PASSAT2002, 2003

Listing a model year does not mean every vehicle of it is concerned: the document says which.

Other bulletins for the same vehicles and component
TT4513012023-07-10. Service bulletin. After replacing a Bosch 5.7 ABS module, refer to the table below to determine correct module coding value based on vehicle PR codes. Listed login code must be entered under Access/authorization before coding is attempted. After completing coding, G85 steering angle sensor basic settings must be performed before cycling key. To perform G85 basic settings manually in Vehicle self-diagnosis (VAS PC) or Control Module OBD (ODIS), start by entering access/authorization code 40168. After code is accepted, turn steering wheel 1 turn left and back to center, one turn right, and then center steering wheel. Select basic settings and enter group 1. Once display changes to ?Sensor OK? or ?Calibration OK?, basic settings have been completed. Cycle key OFF and then back ON. Clear faults to verify repair.
TT4508022023-07-10. Service bulletin. Fault code 02543 000 ?Brake Vacuum Sensor no Display? may be encountered in the ABS module. This may be caused by the hydraulic brake boost function (HBV) in adaptation value 61 being turned off (value = 0). All Passat Wagons (including 4motion) and 3.6L equipped sedans with front drive should have this function turned on (value = 1). Change the adaptation value and verify the fault has cleared. Additionally, it may be necessary to lock the vehicle and allow the modules to go to sleep to clear the fault.
TT4506542023-07-05. Service bulletin. To code a Bosch 5.3 ABS control module, use Vehicle Self-diagnosis to enter the correct coding value from the tables below. Note that the first table is only applicable to 2.8L V6 equipped vehicles WITHOUT a CAN-Bus. All 1.8L Turbo vehicles and those 2.8L V6 vehicles that are equipped with a CAN-Bus should use the second table.
TT 45-06-542019-04-08. Service bulletin. Tech Tips (Bosch 5.3 ABS Control Module ? ABS Coding Tables): This document informs To code a Bosch 5.3 ABS control module, use Vehicle Self-diagnosis to enter the correct coding value from the tables in this document.
TT 45-06-542019-04-01. Service bulletin. Tech Tips (Bosch 5.3 ABS Control Module ? ABS Coding Tables): This document informs To code a Bosch 5.3 ABS control module, use Vehicle Self-diagnosis to enter the correct coding value from the tables in this document.
TT-45-06-542013-02-26. Service bulletin. VOLKSWAGEN: UPDATE TO INFORMATION. PROVIDING CORRECT CODING VALUES FOR ABS CONTROL MODULES ON CERTAIN VEHICLES WITHOUT CAN-BUS. MODELS 1998-2002 PASSAT. *PE
05172005-08-19. Service bulletin. ANTI-LOCK BRAKE SYSTEM (ABS) CONTROL MODULE WARRANTY REPAIR PROCESS. *TT